16ga.com ~ Search

I've shot both their 16 and 12 gauge 2 1/2 ammo and it's good. I've about 5 flats of both on hand.

Here's their website - https://claysammo.com/ - the 16 gauge is listed under "Hunting" ...

up, down - up, down - up, down - up, down . . .

Thank you for the advice. I shared the writer and book idea with my wife and after reading this, decided to check into Fly Fishing 201.

I am struggling with the possibility she might make me fish ...

I use Ballistol both my and my wife 's guns. She's never complained about the wonderful smell of Ballistol.

My wife and I have 10 shotguns, 7 have fixed chokes and 3 screw in chokes.

In the past 15 years I've not changed the screw in chokes in any of the 3 guns that use them.

I had screw in chokes i ...

They are great little bags. Many, many years ago I got one and had it until my wife started shooting. She then "appropriated" it and it has been her range bag for many, many years. Be car ...

I don't know what the pressure/velocity differences would be in the replacement of the Cheddite hull for a Federal and don't want to experiment without proven data.

I would have no hesitation loadi ...

Gunrunner Auctions is in Burton, Ohio. Not Gunbroker but I have sold guns through them. https://www.gunrunnerauctions.com/

They start every gun at $20 so they all sell. I wouldn't use them for P ...

the only bene of duplexing I seem to glean from them is that adding some steel allows the use of current components and to a degree recipes w/o new load testing

I would seriously question that you ...

Don't do it. It's a waste of TSS. Seriously.

You have low density pellets with a large cross section that slow quickly and you have high density pellets that retain velocity very well. What do yo ...

Years ago I bought one of BPI's manuals and it was junk. Don't waste your money.

Are Upland Gun Company guns steel proofed?

I am told they are okay to put steel through. Proofed? I'm not sure.

I have a 16 ga RFM from Upland Gun Company. If anyone can tell me what the Italian ...

Possibly the easiest way, especially if you have a MEC Sizemaster or 600 Jr. is to cut the hulls to 2.5", and buy a Short Kit to easily load those 7/8 oz. loads.

That eliminates messing around ...

Any dove that 1 ounce at 1165 won't kill can't be killed.

I'm tickled to be able to get them - today we received delivery of a flat of 1 ounce 16's at 1165 for my wife. Also received 3 flats of 1 ...

He has a small amount of RST hulls, which will have to do for awhile since both BP & PR are out of stock on 2 1/2s for awhile. I was going to suggest he get a hull trimmer and use some 2 3/4 hulls ...