16ga.com ~ Search

....and you don't want SP16's for WSF in a Cheddite hull as you will get powder migration... a lot of powder migration.

The best wads are the Gualandi's either the G16 or 16S depending on the paylo ...

16gaDavis,

The UPS Store is not supposed to take ammo or anything else that requires a limited quantity sticker, but I found one that would in my travels.

UPS Customer Centers, which are normall ...

Sorry for your loss Brewster11.

Drake,

The tested load shown in the picture has a chamber pressure of 8600 PSI according to Precision Reloading. The DR16 doesn't mind being crushed a bit.

In all honesty, you might have that problem where the hull is FULL after the crimp start. IF.....if you are using a single stage machine that shouldn't be a problem unless the pellets are falling out ...

I visit the Shotgun World reloading forum often. Honestly, I don't really know why, probably force of habit and there are a few guys that I like and have good ideas.......BUT the majority of the posts ...

When hunting from home, I don't carry an extra shotgun. When I am staying overnight or for a few days I do. I probably shouldn't say this.....but I have never had a shotgun fail during a hunt or hunti ...

Brewster11,

The important piece to this is, as Nick mentioned, central nervous system. It's the key to a stone dead bird. That's why there is all the fuss over shot sizes for birds. What Nick is su ...

........and what's wrong with a 1 oz. or 1 1/8 oz. loads of #6's @ 1,250 FPS? That combo has taken an awful lot of phez, grouse and other birds through the years. Not saying that your loads won't be e ...

Somebody rattle my cage?

Here is what I found on the subject.

Browning introduced the Invector choke tube system, also known as the "Standard Invector" system, in 1983. A few years later, the Invector-Plus chokes ...

That load will be fine. It might help it burn cleaner, but I wouldn't expect miracles.

I am generally not a big Roster fan. I think his work with steel shot is very good. The rest, IMO is biased to ...

Roster wrote that article after he said something stupid in a previous article about 2 3/4" loads in a 2 1/2" hull. He is just covering his butt. Roster does not own a pressure gun and no on ...

This is what I know.

If you use a 2 3/4" load in a 2 1/2" hull, do not change any component and roll crimp the chamber pressure will be same or slightly less than that load in the 2 3/4&q ...

Charlie,

I originally used Gualandi data, Cheddite hulls, 26.0 grains 3N37, SG16 and 1 1/8 oz. of shot. I used a Winchester 209 because you can't get the Cheddite CX1000 or the Fiocchi 615, that Gu ...