16ga.com ~ Search

If you can access vitavuhori 3n38 powder it'll push 26g of steel shot (15/16ths OZ) along at 1400fps with a 29gn charge and a cx2000 primer. It drops perfectly through a bushing or a meter. Don't use ...

B&P have recently added a 32g (1 1/ Cool

and a 36g (1 1/4) load to their 16ga range. I don't know if their American branch loads the same offering.

WJ good to see another 16ga fan in the North. My brother was recently gifted a JP Sauer 16. It's a wee cracker.
I use my 16s on the big Lough as my weapon of choice. I have never found 16ga ammo har ...

I have used it over here along with a range of other Maxam powders.

The data suggests 1.4g (21.5gn) for plastic wads. 1.5g (23gn) for fibre wads.
CX1000 primer and 1oz of shot.

Used to get i ...

I would take Ross.m.scott up on his generous offer for a 3D printed shim. You need to relieve the wood some to ensure full contact. But it isn't difficult to do. I have used padded moleskin before ...

The Beretta pads were too low and would not stay on the stock so they went back. I’m going to start calling around to see if I can get an adjustable comb installed on it. So far I’m very disappointed ...

I have this problem with all my Browning Autos and Pump actions. If you have access to a 3D printer you can make shims that will provide the angle to get the height you need. It will save you putting ...

If you want I can 3D print you shims for the A5 16g. I did it to mine to drastically raise the comb. I have done this with all my Browning shotguns. Let me know.

There are a lot of setters moving around here in Ireland at relatively small money. Too many men want those bloody springers and cocker spaniels here now, such a pollution of a dog.
Might be a hards ...

Have accounted for around 500 crows and woodpigeons so far

That's splendid shooting anywhere...decoys & caller or pass shooting?

B.

Decoying on stubble fields and farm yards. A few assaul ...

I have been having a great summer with mine. Have accounted for around 500 crows and woodpigeons so far. I have been shooting mostly 1oz loads and a few heavier 1 1/4 oz loads that I threw together a ...

Being as I had little to do this weekend, I contacted a number of choke manufacturers regarding aftermarket DS chokes.
Kicks say they will definitely produce some in the near future.
Patternmaster ...

Have any of you gentlemen contacted Jebs regarding a price for a custom cut choke? I have finally got my A5 after nearly 3 years waiting and would be keen on some aftermarket tubes. How are the truloc ...

Thanks for that information Rick.
I'm not sure exactly, as far as I know it is a couple of hours north of Regina. I think I will try to get my guide to bring ammo from the US side as it appears cons ...

Sir, I do not use steel anymore and cannot comment on the availability of 16 ga steel shells in Canada but I do know that both FED&REM only make them in American size's 2 and 4. Those work for duc ...