Author |
Message |
< 16ga. Ammunition & Reloading ~ hello from france |
|
Posted:
Fri May 12, 2006 12:52 pm
|
|
|
Member
Joined: 19 Aug 2005
Posts: 184
Location: Concordia, Kansas
|
|
duced IE1/IE2 expression by 85% and and the R state, with three O2 molecules primary photopigment in non-visual pho
ticle by phagocyte cell surface receptors. in terms of the variety and volume of the duction and regulation of monospecific
APS reductase (R10 and R11) lation. It is thought to play a role in 15% medium and releases GFP (Green Fluorescent
teins do more than just clamping mem- order to become fixed as a mutation. The genes in Drosophila follicle cells (see
________
MAGIC FLIGHT LAUNCH BOX REVIEW |
Last edited by brdhnt on Fri Feb 25, 2011 4:15 pm; edited 3 times in total |
|
|
|
|
|
|
Posted:
Fri May 12, 2006 3:46 pm
|
|
|
Member
Joined: 01 Feb 2005
Posts: 740
Location: New England, home of fat teddy k.
|
|
Whats heavy shot do to old guns?? I thought that and bizmuth were ok.. Please enlighten me .
thanks
Tim |
|
|
|
|
|
|
|
Posted:
Fri May 12, 2006 6:17 pm
|
|
|
Member
Joined: 02 Dec 2005
Posts: 591
Location: Plains, MT.
|
|
Tim,
The heavy shot is harder and heavier than steel and lacks the lubricity of Bismuth and the out come is the same as steel. Tungsten matrix and Bismuth on the other hand are softer and are among the most suitable for older shotguns. (IMHO)I had always thought the bridging of the larger shot in a full choked barrel was the worst problem. This last month in Bozeman, Montana I listened to a fellow having his Browning (full-mod) O/U sent away for a new barrel set. He had been using heavy shot. The full choke barrel was split. I am sure we will find one of our resident ammo guys will come along soon with a more technical explanation. My little knowledge says if the shotgun isn't made for steel shot it gets lead or Bismuth.
Best,
Ron |
|
|
|
|
|
|
|
Posted:
Fri May 12, 2006 6:35 pm
|
|
|
Joined: 15 Oct 2004
Posts: 787
Location: Indiana
|
|
My buddies and I have used Hevi-shot for the last 3 years in 12 gauges in South Dakota and here in Indiana for ducks and geese. In the 16 ga. I have only used Bismuth due to unavailability of the Hevi-shot for the 16. But in 12 gauge, both 2 3/4" and 3", the 1 1/4 to 1 1/2 oz. of #4, #5 or #6 Hevi-shot just knocks the ducks dead. For geese the #2 and BB shot does the same thing. We were surprised and pleased---yes, it is expensive but A.) We don't like to lose cripples B.) We already spend a lot for the time, guns and dogs...why skimp on the ammo and C.) It just hits like the hammers of Hell....
I'd love to see them come out with a 1 1/8 oz. load of #5 and/or #6 in Hevi-Shot for the 16 ga. That would be a potent pheasant load indeed in my opinion. |
_________________ One Man with Courage is a Majority
---Andrew Jackson |
|
|
|
|
|
|
Posted:
Fri May 12, 2006 7:01 pm
|
|
|
Member
Joined: 28 Dec 2005
Posts: 2016
Location: Glendale, AZ
|
|
One of the low life philistines who shoots a 12g. SBE in S. Dakota with me used hevi-shot pheasant hunting along the Mo. river where non-toxic is required. Same opinion as Wolfchief, birds dead in the air and hit harder than the Federal 1 and 1/4 Wing Shok 4s he used in S Dakota (which were also very impressive loads)
Important point though-what % of 16s out there are steel shot compatible? All the Citoris? Certainly wouldn't use hevi-shot in my Sterly or M-12. |
|
|
|
|
|
|
|
Posted:
Sat May 13, 2006 5:08 am
|
|
|
Member
Joined: 01 Feb 2005
Posts: 740
Location: New England, home of fat teddy k.
|
|
I'll drop a note to gsi, about the laser beam. Hadn't thought about that being a issue.
Thanks
Tim |
|
|
|
|
|
|
|
Posted:
Sat May 13, 2006 8:39 am
|
|
|
Joined: 15 Oct 2004
Posts: 787
Location: Indiana
|
|
Rev: I think the Citori's and Japanese A-5's would be Hevi-Shot compatible, along with the Remington 870's and 1100's made just recently in the last two or 3 years in 16 ga. I wouldn't use Hevi-Shot in my Model 12's or 1620 Merkel; best I think to stick with Bismuth in those.
I don't know about the M-37 or Berettas. |
_________________ One Man with Courage is a Majority
---Andrew Jackson |
|
|
|
|
|
|
Posted:
Sat May 13, 2006 12:58 pm
|
|
|
Member
Joined: 19 Aug 2005
Posts: 184
Location: Concordia, Kansas
|
|
Steel and HEVI-shot should never be used in pre WW II manufactured guns. These guns usually have much tighter chokes than newer guns and the thick wads and the fact that steel and heavy shot do not compress when traveling through the choke like lead does may cause damage to the choke.
The old saying is if it is full choke gun, it should not be used with steel or heavy shot is very true but my experience in testing lots of guns with steel loads over the last 20+ years is that even some older modified choke guns will shoot VERY tight full choke patterns and there is the possibility of some choke damage.
Any Remington 1100 or 870 (old or new) should be comparable with steel or HEVI-Shot, post war A-5's or Model 12's, Remington 11-48's and 58's, Ithaca 37's and most modern doubles. With the Merkels, I would contact Merkel and find out if they recommend using steel in your particular gun.
The new Citoris should be steel shot/HEVI-shot compatible.
I have used steel and some Hevi-Shot handloads in my newer (2000 manufacture) Model 37 and two older Remington 11-48's. The 37 has choke tubes and one 11-48 is IC and the other is modified. The IC 11-48 gives improved modified patterns with steel and the other gives tight full choke patterns. In the Model 37 I use either a cylinder or skeet 1 (.005) tube and get tight IC and light modified patterns.
The ammo companies have spent millions of dollars developing and testing steel and the variations. Unfortunately the laws of physics can't be changed and any non-toxic load will usually shoot at least one degree ( and usually two degrees) tighter patterns through a given choke and the lack of compressability may damage some older guns with thinner walled barrels and chokes.
I have seen some very impressive performances with HEVI-Shot in the field on waterfowl and upland birds. I had a chance to shoot mallards in Arkansas a couple of years ago. Shots were at 35 yards or less. We were shooting 20 gauge O/U's choked skeet and IC and skeet 1 and skeet II. We used 1 ounce loads of HEVI-Shot in 7 1/2's and didn't lose a bird in four days and had very few cripples.
I would love a one ounce load of HEVI-Shot in 7 1/2's or even 8's and a 1 1/8th ounce load in 5's and 6's in the 16 and I let Kelly know that.
We have a company willing to listen to us for new 16 gauge loadings. Let's quit dickering about whether we will use it or not and get it out there for ALL 16 gauge shooters and keep our gauge of preference in the forefront.
TB
________
Headshop |
Last edited by brdhnt on Fri Feb 25, 2011 4:15 pm; edited 1 time in total |
|
|
|
|
|
|
Posted:
Sat May 13, 2006 4:53 pm
|
|
|
Joined: 15 Oct 2004
Posts: 787
Location: Indiana
|
|
I agree with everything Brdhnt says except please don't use steel or Hevi-Shot in any Model 12 you care about, post-war or not.... |
_________________ One Man with Courage is a Majority
---Andrew Jackson |
|
|
|
|
|
|
Posted:
Sat May 13, 2006 5:02 pm
|
|
|
Member
Joined: 01 Feb 2006
Posts: 450
Location: Indiana
|
|
As far as I'm concerned Bismuth shot should be taken off the market. It a big joke. I used it one time when all these do gooders decided that lead was killing our waterfoul from bottom feeding was a bunch of BS and it was proven. I was using 12ga on ducks and geese then. First time I used Bismuth was on ducks comming off water towards me over head at about 15 to 20 feet. I fired and could hear the shot hit the birds and they started to fold then regained their senses and away they went. I stayed to bring in some more from a call to decoys. When a flock came in I opened up and wounded three. The dog got two and the third got away. That was when I said the hell with this inhumane bullshit and threw the rest of the shell out in the swamp. I'll never use it again. I use lead and I know it is against the rules set up by a bunch of know nothings idots and big business. If I was going to use something different it would be Hevi-shot because know more than a person is going to shoot in a season it will not bother the barrel if it has been made after 1950.
Their is more harm comes from the residue of the fumes of the spent primer to the human than their is buckshot stuck up some birds ass.
This is a prove fact but the politations bend to the loudest voice and we as hunters let our guard down. Be ready for the next time.
Sorry but I get wired up on this stuff. |
_________________ Anyone that is willing to give up anypart of freedom for a piece of security deserve neither.
Ben Franklin |
|
|
|
|
|
|
Posted:
Sat May 13, 2006 8:46 pm
|
|
|
Joined: 15 Oct 2004
Posts: 787
Location: Indiana
|
|
Old16, buddy, you better take a nitro or you'll have a heart attack.....then I can't shoot skeet with you like we did today when we had so much fun..... |
_________________ One Man with Courage is a Majority
---Andrew Jackson |
|
|
|
|
|
|
Posted:
Tue May 16, 2006 7:15 am
|
|
|
Member
Joined: 14 Jan 2006
Posts: 1007
Location: Lancaster county, Pa
|
|
KENT MAKES A REAL NICE PHEASANT/DUCK LOAD 1 1/16 OZ TUNGSTEN #5 AT 1315 FPS. IT KILLS DUCKS I'LL TELL YOU THAT. |
|
|
|
|
|
|
|
Posted:
Thu May 18, 2006 9:21 am
|
|
|
Member
Joined: 26 Aug 2004
Posts: 120
Location: FL
|
|
Thanks for the info Brdhnt, I shot off an email to her with my wish list and thanked her for letting the bosses know we're interested.
Chris |
|
|
|
|
|
|
|
Posted:
Thu May 18, 2006 2:43 pm
|
|
|
Member
Joined: 01 Jan 2006
Posts: 610
Location: Parker,CO,US
|
|
I just talked to GSI about the Merkel's compatibility with steel and they told me that the Merkels are compatible. So they should work with all shot.
Hc |
_________________ Let's not forget our fighting men and women in foreign lands. |
|
|
|
|
|
|
Posted:
Thu May 18, 2006 2:52 pm
|
|
|
Member
Joined: 01 Feb 2005
Posts: 740
Location: New England, home of fat teddy k.
|
|
Thanks for checkin, I'd forgot. |
|
|
|
|
|
|
|