16ga.com Forum Index
Author Message
<  16ga. Guns  ~  New Sweet Sixteen - Wrong Choke Set
Cass
PostPosted: Sat Jan 14, 2017 6:16 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

I went out to shoot my new Sweet Sixteen today and discovered that I had the wrong choke set. It came with a 16ga IC tube in the gun, but the two chokes and the choke tool in the case are 12 gauge.

Questions for those of you with a new Sweet Sixteen:

What choke came in the barrel?

Is the tool marked 16ga?

Is the choke case any different than the black 12 gauge case?

Thanks,
Cass
Back to top
View user's profile Send private message Send e-mail
Troop10
PostPosted: Sat Jan 14, 2017 6:32 pm  Reply with quote



Joined: 16 Oct 2014
Posts: 25
Location: OH

My SW16 had the IC choke installed when I received it. Fortunately, my black case had two 16 tubes in it. The tubes do not have any reference of identifying them as 16 gauge. I hope this answers your questions.

Jim
Back to top
View user's profile Send private message
Ray-citori
PostPosted: Sat Jan 14, 2017 7:09 pm  Reply with quote



Joined: 05 Feb 2015
Posts: 267
Location: New Braunfels TX

Aren't the new sweet 16's chokes the DS chokes as well?
Back to top
View user's profile Send private message
Troop10
PostPosted: Sat Jan 14, 2017 7:22 pm  Reply with quote



Joined: 16 Oct 2014
Posts: 25
Location: OH

They are DS choke tubes for the new SW16.
Back to top
View user's profile Send private message
Cass
PostPosted: Sat Jan 14, 2017 8:23 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

Troop10 wrote:
My SW16 had the IC choke installed when I received it. Fortunately, my black case had two 16 tubes in it. The tubes do not have any reference of identifying them as 16 gauge. I hope this answers your questions.

Jim


Thanks Jim. It helps to know yours had the IC choke installed. I wanted to make sure the store didn't switch things around before I bought it.

The chokes are not marked with the gauge, but the tool is marked. Of course the outside diameter of the 12 gauge tubes is about the same as the OD of the 16 gauge barrel.

Looks like I'll be calling Browning on Monday.

Cass
Back to top
View user's profile Send private message Send e-mail
Cass
PostPosted: Sat Jan 14, 2017 8:44 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

What about the manual and other accessories? I wonder if they mixed those up too?

The manual doesn't mention gauge and looks like my 12ga A5 manual, but I assume it is just generic to both.

The shims and spacers are the same size as my A5 12ga. I haven't had the 16ga stock off yet to see if that is correct.

Could any of you who have an A5 12ga comment on those?

Thanks,
Cass
Back to top
View user's profile Send private message Send e-mail
Cass
PostPosted: Mon Jan 16, 2017 10:16 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

I talked to Browning today and they are sending out the correct choke tubes and tool. They are checking on the shims, some said they were the same and others said they were different.

They confirmed that the spacers for the butt pad are the same between the 12ga and the 16ga.

They haven't had many calls for parts on these yet!

Cass
Back to top
View user's profile Send private message Send e-mail
hoashooter
PostPosted: Tue Jan 17, 2017 7:34 pm  Reply with quote
Member
Member


Joined: 08 Nov 2005
Posts: 3436
Location: Illinois

Someone must have just woke up after a nap before that was shipped---at least they made it right.Did Browning want the 12 ga. tubes returned?
Back to top
View user's profile Send private message
Cass
PostPosted: Thu Jan 19, 2017 9:13 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

They didn't mention that and I didn't think to ask. I'll wait and see what is in the package when it arrives. They might be sending a return label.

Cass
Back to top
View user's profile Send private message Send e-mail
Cass
PostPosted: Wed Jan 25, 2017 12:51 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

Could one of you confirm what type of choke wrench your Sweet Sixteen came with. Is it the plastic "T-Wrench" type similar to the 12ga new A5's?

I got the correct choke tubes today but they sent a standard invector wrench which is way too thick.

Thanks,
Dave
Back to top
View user's profile Send private message Send e-mail
fn16ga
PostPosted: Wed Jan 25, 2017 2:35 pm  Reply with quote
Member
Member


Joined: 09 Jan 2013
Posts: 2165
Location: Florida

Mine came with the plastic "T-Wrench" type .
Back to top
View user's profile Send private message
Cass
PostPosted: Wed Jan 25, 2017 3:27 pm  Reply with quote



Joined: 07 Feb 2008
Posts: 87

fn16ga wrote:
Mine came with the plastic "T-Wrench" type .


Thanks! I'm on the phone with Browning right now.

It's apparently not shown on their website or parts list yet, so they are trying to figure out how to get it internally.

Cass
Back to top
View user's profile Send private message Send e-mail
Cass
PostPosted: Sun Mar 05, 2017 8:13 am  Reply with quote



Joined: 07 Feb 2008
Posts: 87

Would one of you be willing to take a picture of the 16ga "T-Wrench" that comes with the Sweet 16? I would like to send it to Browning to show them what I need.

I just received their second attempt to send me the correct choke wrench, this time they sent the "Dual Invector" wrench which of course doesn't work with the DS chokes. The first attempt was the standard invector wrench.

At least they are trying, but it would be nice to have a choke wrench for my shotgun rather than using a penny held by pliers to change chokes.

Cass
Back to top
View user's profile Send private message Send e-mail
fn16ga
PostPosted: Sun Mar 05, 2017 9:41 am  Reply with quote
Member
Member


Joined: 09 Jan 2013
Posts: 2165
Location: Florida

If you would like it in an email pm your address

Back to top
View user's profile Send private message
Cass
PostPosted: Sun Mar 05, 2017 10:13 am  Reply with quote



Joined: 07 Feb 2008
Posts: 87

Thank you sir, that is perfect! I was able to copy them from here so no need to email.

Thanks,
Cass
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 2
Goto page 1, 2  Next
16ga.com Forum Index  ~  16ga. Guns

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09