Author |
Message |
< 16ga. General Discussion ~ Lube Comment |
|
Posted:
Fri Mar 17, 2017 11:21 pm
|
|
|
Joined: 08 Feb 2009
Posts: 1301
Location: Western WA
|
|
At some point in the not too distant past I started using Ballistol, especially after some testing and observations indicated that WD-40 basically disappeared over time and left little or no evidence of lubricity or protection.
I was so satisfied with Ballistol on my firearms that I purchased a large spray can of it and began using it for general household purposes. A couple years or so back I used it to lube the roller wheels on our electric clothes dryer when they started to howl. It worked well enough until last year when I had time to install a new roller wheel for one that was in the worst condition, which I lubed with lithium grease upon installation.
The dryer belt frayed the other day (they don't make the like they used to, barely got 17 years out of that thing, but it was used when we bought it) and when I took it apart to replace it I was surprised to see that after one year, the lithium grease had turned into a stiff sticky gum and the wheel barely turned! The other wheel which had Ballistol was slightly gummed up but it turned smoothly with only moderate resistance.
So now I have some doubts about lubes in general, but Ballistol seems good if not ideal. I put some graphite lube on the dryer wheels but who knows what will happen (we have some teens in the house and, like the shower, the dryer never stops.) Firearms generally don't encounter the usage conditions like a clothes dryer but maybe a semi-automatic might generate heat and wear to thicken Ballistol like the dryer.
Any thoughts or observations, gentlemen?
Brewster |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 8:16 am
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 22 Aug 2011
Posts: 1498
Location: the Moosehorn
|
|
I use 3+1 oil as it is a pure lubricant. I use it on everything. I use Hoppes to clean guns and break rusted fasteners etc. I have used so many other products over the years I cant count them. Now I am back to these two. |
_________________ ALWAYS wear the safety glasses
If you take Cranberries and stew them like applesauce they taste much more like Prunes than Rhubarb does ----G.M/ |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 11:02 am
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 09 Dec 2009
Posts: 1370
Location: Cheyenne, Wy
|
|
Over the years, it has remained pretty much the same for me. Light gun oil, Hoppes number nine, and I keep some Kroil around to loosen frozen parts.
Dale |
_________________ One man with courage makes a majority.
...Andrew Jackson... |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 12:28 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 26 Mar 2008
Posts: 363
Location: connecticut
|
|
General Electric washer & dryer over 25 years old .Washer running w/o a hitch. Dryer developed a squeak in the drum bearing. My go to lubricant is Gibbs penetrating spray lube. After assessing the bearing I gave it a judicious spray, it still squeaked ,so I dusted the bearing area with powdered Teflon ( Hoppes item no 3062) . After a min. or so the squeak stopped. This was about 3 years ago. It started squeaking recently, and a reapplication of these products stopped it again.
The Gibbs product has un- frozen numerous bolts I would never believed could move. I must have used it on a gun some time, cant recall. Hoppes no 9 user since 1949 . |
_________________ A thing of beauty is ajoy forever! |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 12:54 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas
|
|
WD-40 for cleaning
Ballistol for lubricant
RIG to pressure points and long term
Mike |
_________________
,
USAF RET 1971-95 |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 12:58 pm
|
|
|
Joined: 20 Jul 2011
Posts: 625
Location: Ohio..where ruffed grouse were
|
|
Good question.
I don't know but.....it's slippery. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 2:05 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 27 Dec 2005
Posts: 582
Location: Great Lakes
|
|
Ballistol keeps my shredder running smoothly. |
_________________ A Springer Spaniel, a 6# double and a fair day to hunt. |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 3:27 pm
|
|
|
Joined: 03 Feb 2008
Posts: 830
Location: Adirondak Mtns
|
|
[quote="byrdog"]I use 3+1 oil as it is a pure lubricant. I use it on everything. I use Hoppes to clean guns and break rusted fasteners etc. I have used so many other products over the years I cant count them. Now I am back to these two.[/quote]
I'm with you my friend. 3&1 and Hoppes. I still have two large bottle of the original formula. I tend to horde things.
Joe |
_________________ Interested in older US made SxS and upland hunting. New to reloading shot shells and looking for info and advice. |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 3:31 pm
|
|
|
Joined: 30 Sep 2015
Posts: 637
Location: NEW SALISBURY INDIANA
|
|
I use to use 3 and 1 oil, until I used it on my pristine colt python, and after leaving it in the safe for a couple of years, the oil had dried up locking the cylinder. now only gun oil and rig. |
_________________ 16ga 3-Win 37
16ga Ithaca 37 1946
16ga Western Auto Revelation
16ga Browning A-5 1929
16ga Marlin 90 1939
16ga browning citori lightning grade 3 2003
16ga Francisque Darne 1920 |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Sat Mar 18, 2017 6:52 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 10 Jul 2010
Posts: 356
Location: Ponchatoula, Louisiana
|
|
Cheyenne08 wrote: |
Over the years, it has remained pretty much the same for me. Light gun oil, Hoppes number nine, and I keep some Kroil around to loosen frozen parts.
Dale
|
+1, Got to have my Kroil!
Chuck |
_________________ The reason I am awed by shotgun shooters is that most of them don’t know how in the hell they do what they do.
Charles F. Waterman, |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Mon Mar 20, 2017 5:33 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 08 Aug 2011
Posts: 1946
Location: Central CT
|
|
RemOil for my repeaters to keep them running.
Super Lube grease for all choke tube threads. It doesn't stain clothes or your shooting vest.
Shooter's Choice grease for break actions.
Hoppes's 9 for bore cleaning.
Shooter's Choice Rust Preventative to keep stuff rust free.
Rock 'n Roll Super Web grease for everything on a MEC reloader, including the collet. Lasts a long time and does not dry out like Anti-seize that MEC recommends. |
_________________ Mark |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Tue May 09, 2017 4:31 pm
|
|
|
Joined: 17 Mar 2017
Posts: 2787
Location: Endless Mountains of Pa
|
|
Gentlemen,
For generations we have used good cleaning solvent to clean our L.C. Smith double guns. One of the best out today is the latest version of BreakFree. The new owners have returned to the original Military approved version, and it both cleans and water proofs, along with building up a protective coating as it is used.
Wipe any extra BreakFree off the gun and place one drop of Singer Sewing Machine Oil in the proper working places.
Our L.C. Smith Double Guns are in perfect shape, having been passed down thru the generations.
Pine Creek/Dave |
_________________ "L.C. Smith America's Best" - John Houchins
Pine Creek Grouse Dog Trainers |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Tue May 09, 2017 6:30 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 01 Dec 2008
Posts: 605
Location: Topeka, Kansas
|
|
Eesox for all lube protection applications (including choke tubes which I pull during every cleaning.
Hoppes 9 for bore solvent
Cleenzoil hinge pin jelly
And a 1 to 3 3/1 oil to vaseline sparingly on the internal works of side locks per the Purdey instructions (though I may be off on the ratio-but right on vaseline)
To restore wood I have used CCL Gunstock Conditioning Oil on wood before waxing.
I also use Renaissance Wax on the wood and lubricated metal |
_________________ Michael
Topeka, KS |
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Wed May 17, 2017 1:24 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 02 Oct 2004
Posts: 425
Location: Maine
|
|
Quote: |
Eesox for all lube protection applications (including choke tubes which I pull during every cleaning.
|
+1
Eezox is amazing, used it for years, including duck hunting in tidal areas, bad weather etc. Never any rust.
I drank the Amsoil Kool-Aid, and I've started using their gun care products in place of Break free CLP. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|
Posted:
Wed May 17, 2017 4:16 pm
|
|
|
Member
![Member Member](images/theavatar.jpg)
Joined: 28 May 2007
Posts: 370
Location: Columbia, SC
|
|
BigCreekMI wrote: |
Ballistol keeps my shredder running smoothly.
|
I use Ballistol on my guns (except my M-1, which is a "grease" gun) but never for my shredder because it costs too much.
When I looked up the MSDS for Fellowes shredder oil "Powershred Performance Shredder Oil" I found out that it was canola oil - now I buy it at Wal-Mart for much less than the "official" oil or Ballistol. Paying less for my shredder oil lets me shoot more. |
|
|
|
|
|
![](templates/NoseBleed/images/spacer.gif) |
|