16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Need a load for 16
wannagohunting
PostPosted: Sun Mar 19, 2017 5:51 pm  Reply with quote



Joined: 24 Nov 2013
Posts: 77
Location: Glendale AZ

OK I did pay for a membership for the low pressure group many moons ago
I have kind of lost track as to how to use the group and I once down loaded a bunch of loads. That aside can someone help me with possibly finding a load using the following components I have on hand.
Load needs to be under 1200 fps and preferably under 9000 psi

Rem RP hulls
700X powder
Win AAA wads
CCI or Win 209 primers.

Thank you very much
Back to top
View user's profile Send private message
skeettx
PostPosted: Sun Mar 19, 2017 6:18 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

Have you also joined the FREE Yahoo group?

http://uk.groups.yahoo.com/group/reloading16gauge/

I looked in yahoo and no loads with those primers.
And the load listed even though in the target velocity zone were at 11,000 psi

Mike

_________________
,
USAF RET 1971-95
Back to top
View user's profile Send private message Send e-mail
Charlie16ga
PostPosted: Sun Mar 19, 2017 7:00 pm  Reply with quote



Joined: 28 Aug 2014
Posts: 924
Location: Eastern Tennessee

I am 90% sure that my list has no 700x loads with the desired results. That's a listing of over 2,000 loads, maybe closer to 3,000. Can look for sure tomorrow.

_________________
16' Brown A5
15' Brown White Light Citori
13' Brown Upland Spcl BPS
02' Rem 870 Exp
53' Rem 870 Wing
53' Mar 90 DT
50' Mar 90 DT
47' Rem 31L
46' Win 12 (2)
33' Rem 31
Back to top
View user's profile Send private message
wannagohunting
PostPosted: Sun Mar 19, 2017 7:29 pm  Reply with quote



Joined: 24 Nov 2013
Posts: 77
Location: Glendale AZ

Thanks Mike and Charlie. Yes I did join the free group also.
I have a surplus of 700X I have just finished loading a load
that was
700X 12.8 gr
CCI 209 primer
REm SP16 wad
1075 fps and 9700 psi

I used up all my Rem sp16 wads and I have a couple full bags of WAA16 wads
So looking for a load that would allow the use of the WAA16 wads.
I have never swapped any components from a published load so not sure about just switching wads. Would I dare switch the wads?
Back to top
View user's profile Send private message
putz463
PostPosted: Mon Mar 20, 2017 12:52 am  Reply with quote
Member
Member


Joined: 06 Oct 2007
Posts: 2343
Location: West MI

wannagohunting wrote:
Would I dare switch the wads?


Sure, load 3 of your 700/WAA combos up and send to Tom Armbrust for testing/verification.

http://www.16ga.com/forum/viewtopic.php?t=19975

_________________
Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up.
Back to top
View user's profile Send private message Send e-mail
Charlie16ga
PostPosted: Mon Mar 20, 2017 12:33 pm  Reply with quote



Joined: 28 Aug 2014
Posts: 924
Location: Eastern Tennessee

Okay found a 1 oz using your components, but it is not around 1,200 and it is well over your 9,000 PSI.

If I was going to send a load in trying to get close to your results I'd load less than 13.0 of 700x.

_________________
16' Brown A5
15' Brown White Light Citori
13' Brown Upland Spcl BPS
02' Rem 870 Exp
53' Rem 870 Wing
53' Mar 90 DT
50' Mar 90 DT
47' Rem 31L
46' Win 12 (2)
33' Rem 31
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09