Joined: 01 Dec 2008
Location: Topeka, Kansas
I have reloaded w/o cleaning but not normally
Typically I wash them in an ultrasonic cleaner then rinse. If I have a heavy glue/sodium silicate build up I use a brass chamber brush to clean them out, then back into the cleaner then a rinse and dry before reloading.
Oops, I forgot to mention that I clean the hull mouths before reloading. I chuck up a 16 Ga. wire brush in my drill press and run the brush in and out a few Tims to remove the glue used to seal the OSC.
for me, when I use the black powder in brass hulls for duck or goose hunting,
I keep a bucket of soapy water next to my duck bucket.
When fired, the hulls get dropped into the bucket. Later, deprimed, cleaned with a bottle brush, rinsed and dried, then sized, then reloaded.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum