Author |
Message |
< 16ga. Ammunition & Reloading ~ FS: MEC GRABBER 410 2.5" |
|
Posted:
Thu Jul 26, 2018 2:55 am
|
|
|
Joined: 06 Oct 2013
Posts: 20
Location: Chula Vista, CA
|
|
I know its not a 16 but someone might need for good price.
Used: MEC GRABBER 410 2.5” Item#8567N410
Graf&Sons new price 545.00 Graf charges $7.95shipping
July 2018: Grabber $200.00
(AS IS) working fine when last time used. YES, it needs some cleaning up.
I will ship BUYER pays shipping 50.00 I just shipped a 9000G across county for 60.00. I'll eat anything passed the 50.00. UPS Ground.
Loader is in San Diego
SOLD and SHIPPED
|
Last edited by K9I449 on Sat Jul 28, 2018 4:30 am; edited 2 times in total |
|
|
|
|
|
|
Posted:
Thu Jul 26, 2018 8:00 pm
|
|
|
Member
Joined: 01 Dec 2005
Posts: 1550
Location: Minnesota and Florida
|
|
Folks, this is a really good deal. Notice it is an 8567N - emphasis on "N" -- has the new primer feed system - higher capacity and easier to load with primers. I'd definitely be buying this one if I needed it -- already have two 9000's in .410 (plus a 600, of course). |
|
|
|
|
|
|
|
Posted:
Thu Jul 26, 2018 9:44 pm
|
|
|
Joined: 17 Mar 2007
Posts: 209
|
|
Will this unit load 2 1/2" and 3" hulls?
If the answer is yes, I'll take it.
8mmFan |
|
|
|
|
|
|
|
Posted:
Mon Jul 30, 2018 7:50 pm
|
|
|
Joined: 16 Jul 2018
Posts: 2
|
|
It is another issue that can be raised for future use. |
|
|
|
|
|
|
|
Posted:
Tue Jul 31, 2018 7:06 am
|
|
|
Member
Joined: 01 Dec 2005
Posts: 1550
Location: Minnesota and Florida
|
|
According to MEC, the Grabber (8567) in .410 cannot be converted to load 3" shells -- by anything MEC sells, or advises, at least. I'm sure it can be done, but it would likely be a costly exercise.
MEC evidently aims their progressive reloaders at the high-volume shooter market -- target shooters. They always have, and so have all the other manufacturers of progressive reloaders. In the .410, that basically means skeet shooters, who are restricted to 1/2 ounce loads, which are typically loaded into 2 1/2 inch shells.
I use a very old MEC 600 for my 3" .410's. |
|
|
|
|
|
|
|
Posted:
Wed Aug 01, 2018 6:09 pm
|
|
|
Joined: 17 Mar 2007
Posts: 209
|
|
Thanks Smoke. I went ahead and bought it. We have hundreds of AA 2 1/2" hulls, and my sons are using the .410 for skeet, only until they can comfortable fit themselves to my wife's Franchi and Benelli semi-auto 20ga guns. We'll reload with this press for a couple of years, and then mothball it until my two-year old starts shooting clay targets.
8mmFan |
|
|
|
|
|
|
|