16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Wad Recommendation Requested
Two Barrels
PostPosted: Mon Jan 21, 2019 7:32 am  Reply with quote



Joined: 11 Dec 2015
Posts: 83
Location: Upstate, SC

I am wanting to load some 7/8oz loads for a couple of my 16 ga guns. Mainly for lower felt recoil and to use less shot. I have plenty of AA16 wads for 1oz loads. I have various quantities of a number of different brand hulls. My first thought is to just buy the DR16. However, there are several options that Ballistic Products sells that could work as well. Based on your experience, would you recommend a wad other than the DR16 for this purpose?
Back to top
View user's profile Send private message
16gaDavis
PostPosted: Mon Jan 21, 2019 7:35 am  Reply with quote



Joined: 24 Jun 2013
Posts: 2062
Location: canandaigua - western n.y. (formerly deerhunter)

this should start some backlash , but a big ole cheerio of the cheap brand kind , and the load you are using with 7/8oz of shot will get you started as cheaply as you can get !

_________________
Molly sez AArrrooooooah !
Back to top
View user's profile Send private message
Byron Whitlock
PostPosted: Mon Jan 21, 2019 8:02 am  Reply with quote



Joined: 27 Jan 2016
Posts: 488
Location: Oswego, Kansas

If you look back a couple years on this site you will find a long discussion on this subject. A lot of use used the cheerio trick but had trouble with munching on them while loading.
I found that a pinto bean or two dropped in before dropping the shot worked real well and I wasn't tempted to munch on them. Pattern testing showed that they threw a good pattern and the pinto bean even punched thru the pattern paper in the center of the pattern!

_________________
Sweet sixteen forever
LC Smith Field Grade
LC Smith Ideal Grade
CZ Ringneck
Win. Model 12
Rem M11
Stevens 235
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
Ohio Wirehair
PostPosted: Mon Jan 21, 2019 9:18 am  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

I actually switched from pinto beans to airsoft BB's for filler when needed. Their lighter and uniform in size. Not as cheap but not pricey in the grand scheme of things.
Back to top
View user's profile Send private message
stubshaft
PostPosted: Mon Jan 21, 2019 9:41 am  Reply with quote



Joined: 16 Feb 2013
Posts: 95
Location: Southernmost State of the Union

All I load is 7/8 oz. and have had very good performance from the SG-16 wads.

_________________
"The clock of life is wound but once, and no man has the power to tell just when the hands will stop, at late or early hour. Now is the only time you own. Live, love, toil with a will. Place no faith in time. For the clock may soon be still."
Back to top
View user's profile Send private message
Ohio Wirehair
PostPosted: Mon Jan 21, 2019 9:58 am  Reply with quote



Joined: 24 Jul 2016
Posts: 546
Location: Ohio

stubshaft wrote:
All I load is 7/8 oz. and have had very good performance from the SG-16 wads.


Federal and green Remingtons' 15 grns of Green Dot Win. 209 primer SG 16 and 7/8 oz.of shot is my very favorite target/dove load. I'd say the SG16 is the most versatile wad out there. I tear the petals off and add a spreader insert for close work.
Back to top
View user's profile Send private message
mike campbell
PostPosted: Mon Jan 21, 2019 10:03 am  Reply with quote
Member
Member


Joined: 16 Nov 2006
Posts: 1338

Rolling Eyes


Last edited by mike campbell on Fri Jul 26, 2019 9:25 am; edited 1 time in total
Back to top
View user's profile Send private message
Savage16
PostPosted: Mon Jan 21, 2019 10:51 am  Reply with quote
Member
Member


Joined: 30 Nov 2011
Posts: 1694
Location: Minnesota

If you also load for the 20 ga and happen to have any Federal 20 ga 7/8 oz wads on hand they work well in the RGL 16ga hull for 7/8 oz loads

_________________
Great dog, Great friends,Great guns
Back to top
View user's profile Send private message
double vision
PostPosted: Mon Jan 21, 2019 10:56 am  Reply with quote
Guest





mike campbell wrote:

For 7/8 in the RGL I've used thousands of SG20L wads with good success. When mine are gone, I'll probably buy the CB0078-16. I haven't yet, but I'd think somebody on the board can testify to how they work for 7/8 in the RGL.


The CB0078-16 is a wonderful match for the RGL hull.

Jot down or copy/paste everything Mike Campbell has to say about reloading 16 gauge shells.
Back to top
Byron Whitlock
PostPosted: Mon Jan 21, 2019 11:17 am  Reply with quote



Joined: 27 Jan 2016
Posts: 488
Location: Oswego, Kansas

My reference to using pinto beans was simply the way I used what I had for 7/8oz loads until I could get until I got some DR16 wads which work great with no additions needed.
Laughing

_________________
Sweet sixteen forever
LC Smith Field Grade
LC Smith Ideal Grade
CZ Ringneck
Win. Model 12
Rem M11
Stevens 235
Back to top
View user's profile Send private message Send e-mail Yahoo Messenger
mike campbell
PostPosted: Mon Jan 21, 2019 11:18 am  Reply with quote
Member
Member


Joined: 16 Nov 2006
Posts: 1338

Rolling Eyes


Last edited by mike campbell on Fri Jul 26, 2019 9:25 am; edited 1 time in total
Back to top
View user's profile Send private message
Dogchaser37
PostPosted: Mon Jan 21, 2019 11:27 am  Reply with quote
Member
Member


Joined: 08 Aug 2011
Posts: 1946
Location: Central CT

Mr. Erickson has it correct. The CB0078-16 wad works great in the RGL hull. with 7/8 oz. of lead shot.

_________________
Mark
Back to top
View user's profile Send private message
jswanson
PostPosted: Tue Jan 22, 2019 5:37 am  Reply with quote



Joined: 03 Feb 2008
Posts: 830
Location: Adirondak Mtns

In comparison to the other fellows I a newbt to reloading the 16. Having said that I went to the DR-16 based on a lot of good advice found here and never had a reason to look further for 7/8 or 1oz loads. I use Fed, Chedite, and Fio hulls but, know Mr Campbell has extensively used the DR-16 with RGL as well to good effect.

Joe

_________________
Interested in older US made SxS and upland hunting. New to reloading shot shells and looking for info and advice.
Back to top
View user's profile Send private message
Brewster11
PostPosted: Thu Jan 24, 2019 12:50 pm  Reply with quote



Joined: 08 Feb 2009
Posts: 1301
Location: Western WA

The capacity of the SG16 wad cup is about 5/8 oz of #7 1/2 so you could go that low with no filler if you trim the hull down.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09