16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  20/28 low pressure data
Xxkddxx
PostPosted: Thu Aug 08, 2019 5:42 pm  Reply with quote



Joined: 28 Jun 2019
Posts: 2

I was wondering if anyone has used 20/28 powder in a cheddite hull to load semi low pressure 1oz loads? There are a few in the BPI manual but after reading all the negative comments about their data I am concerned. I’m shooting a Remington 1900 with fluid steel barrels.
Back to top
View user's profile Send private message
MSM2019
PostPosted: Thu Aug 08, 2019 6:32 pm  Reply with quote



Joined: 04 Mar 2019
Posts: 1837
Location: Central ND

What pressure are you looking for?

20/28, like Unique and Universal, are perfect powders for 1 oz. loads in the 16. So 7,000 PSI loads are not reasonable unless the velocity is also quite low.

If you are looking for 8,000 to 9,000 PSI, 20/28 is a good choice.

You will find a lot more data for Unique and Universal.

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
Xxkddxx
PostPosted: Fri Aug 09, 2019 5:33 pm  Reply with quote



Joined: 28 Jun 2019
Posts: 2

I think I would be fine in that 8-9000 psi range. What is considered “low pressure” in a 16ga.? I guess my main concern is the accuracy of the BPI data. How does 20gr with a SG16 wad over a ched. Primer listed at 1255 FPS at 8500psi sound? Also I would like to back it down to 1200 or a touch slower if possible.
Back to top
View user's profile Send private message
skeettx
PostPosted: Fri Aug 09, 2019 5:55 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas

Have you enrolled in the FREE Yahoo data??

https://uk.groups.yahoo.com/neo/groups/reloading16gauge/info

_________________
,
USAF RET 1971-95
Back to top
View user's profile Send private message Send e-mail
MSM2019
PostPosted: Fri Aug 09, 2019 6:46 pm  Reply with quote



Joined: 04 Mar 2019
Posts: 1837
Location: Central ND

If you are of the opinion that you need low pressure loads you must come up with that pressure range that you deem 'safe'.

SAAMI's maximum for a 16 gauge is 11,500 PSI.

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
Hammer bill
PostPosted: Sat Aug 10, 2019 3:06 am  Reply with quote



Joined: 09 Feb 2015
Posts: 817

I use 20/28 with 20gr. 1oz of 7-1/2's In cheddite hull for trap consistently. Handles the clay targets at any range even on shootoffs 10 tp 15 yards behind the 27 yd post with no problem. Same load.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09