16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Looking for a 12 ga steel target load recipe
Bill K
PostPosted: Thu Feb 03, 2022 9:11 am  Reply with quote



Joined: 13 Oct 2014
Posts: 254
Location: North Shore of Boston

I hesitate to ask, but the society came through for me regarding a 16 ga steel target load - so it doesn’t hurt to ask.

Ideally I’m looking for a 12 ga 1 ounce target load of steel shot with a muzzle velocity of 1320 fps using either Alliant Steel or Blue Dot

_________________
Bill K
North of Boston
Browning New A5 Sweet Sixteen circa 2019
Browning Citori Upland 16 GA circa 2014
Darne R10 1962
Browning Sweet Sixteen 16 GA circa 1957
Savage Fox Sterlingworth 16 GA circa 1934
Back to top
View user's profile Send private message
skeettx
PostPosted: Thu Feb 03, 2022 10:21 am  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9472
Location: Amarillo, Texas

http://www.alliantpowder.com/reloaders/RecipeList.aspx?gauge=12&gtypeid=10&shotype=1

and

http://www.alliantpowder.com/reloaders/powderlist.aspx?type=2&powderid=15&gauge=12

These are fast but adjustments could be made

Mike


Last edited by skeettx on Thu Feb 03, 2022 10:24 am; edited 1 time in total

_________________
,
USAF RET 1971-95
Back to top
View user's profile Send private message Send e-mail
MSM2019
PostPosted: Thu Feb 03, 2022 10:24 am  Reply with quote



Joined: 04 Mar 2019
Posts: 1846
Location: Central ND

Right off the Precision Reloading website.

Federal Gold Medal 2 3/4" hull
Federal 209A Primer
26.5 Grains Alliant Steel
TUPRW12 steel shot wad with a .125" 20 ga. nitro card (XYFE12520)
1 oz. steel shot

1,365 FPS 10,760 PSI

A lot more load data here:

https://www.precisionreloading.com/docs/uploads/TUPRW12%20Load%20Data%20-%20Website-12-31-21.pdf

_________________
Mark...You are entitled to your own opinion. You aren't entitled to your own facts.
Back to top
View user's profile Send private message
John Singer
PostPosted: Thu Feb 03, 2022 8:29 pm  Reply with quote



Joined: 03 Sep 2014
Posts: 398
Location: Rochester, MN

I went dove hunting for the first time last September in Iowa. Iowa public dove fields require nontoxic shot. I spent almost a month developing a load that I could use for dove hunting and skeet shooting.

Google: VP53 wad recipes. There you will find a PDF file with many steel shot target loads. I used this data to start my load development.

I did not have the VP53 wad, but I settled on the following:

Winchester AA hull
Cheddite 209 Primer
16 grains 700X powder
Claybuster 1 1/8 oz Figure 8 wad (with clear PVC liner)
310 grains #7 steel shot (dropped with 1 1/8 oz charge bar containing a small PVC bushing)

The PVC liner in the wad prevents any contact between the shot and barrel.

This load chronographs at about 1320 fps. It contains more than 300 pellets. It patterns beautifully. It performs very well on a skeet field. I cannot see a difference between my scores with this load and lead shot loads. The load performed extremely well on the dove field.

_________________
John Singer
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09