| Author |
Message |
| < 16ga. Ammunition & Reloading ~ DR 16 WAD UPDATE |
|
Posted:
Wed Sep 30, 2026 8:38 am
|
|
|
Member

Joined: 15 Dec 2009
Posts: 236
Location: eastern oregon
|
|
| Great wads. Maybe Charles Hammack could describe the process of how he came to the final product - wad height, legs, etc etc etc. Must of made several variations and tests? |
|
|
|
|
|
 |
|
Posted:
Wed Sep 30, 2026 11:22 am
|
|
|
Joined: 13 Oct 2015
Posts: 466
|
|
| AmericanMeet wrote: |
|
I don't like purple- but once loaded in Red shells, the purple doesn't show- so no biggie
|
This is the kind of sacrilegious preversion you keep behind closed doors! I would still hunt with you, but would avoid making eye contact... |
|
|
|
|
|
 |
|
Posted:
Thu Oct 01, 2026 11:40 am
|
|
|
Joined: 08 Feb 2009
Posts: 1565
Location: Western WA
|
|
Just a minor point, having gone over to the skeet persuasion, dark colored wads can create difficulties for the scorer, as they can resemble chips of some target brands. Now that might accrue some temporary advantages for me, but skeet shooters being the way they are, it might also provoke some awkward circumstances. Clear or light colored wads would dispel that possibility.
B. |
|
|
|
|
|
 |
|
Posted:
Fri Oct 02, 2026 6:32 pm
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
Update:
Discussion about mold design , color , nominclature change ect. Took place today.
Discussion about retrofit with hot manifold runner is on the table.
All the business stuff was discussed.
Discussion of wad being sent to powder companies for publishing data.
I will push for data on the 5/8 oz - 1 oz and was thinking what the heck how about data on the 1/2 oz as well , what do you all think ?
Things are on the move .
Regards Nick |
|
|
|
|
|
 |
|
Posted:
Fri Oct 02, 2026 6:52 pm
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
Goathoof here is a response to your question.
First collect all the available 16 ga hulls that were commercially at the time.
Size all hulls and deprime on the Lachmiller sizer.
Several hulls of same mfg for comparison.
Measure OAL of hulls with crimps intact.
Measure internal capacity of each brand .
Then the fun starts, let's design a wad.
What function do we want this wad to perform.
I wanted a wad that would do nearly everything but no one thing specifically.
In the real world a specific tool to perform a specific task is very , very limited in scope.
More to come ,
Regards Nick |
|
|
|
|
|
 |
|
Posted:
Fri Oct 02, 2026 7:09 pm
|
|
|
Joined: 27 Aug 2020
Posts: 181
Location: SE TX Marsh and Young County Tx
|
|
| Thanks Nick for everything you are doing! |
|
|
|
|
|
 |
|
Posted:
Sat Oct 03, 2026 7:13 am
|
|
|
Joined: 30 Sep 2019
Posts: 219
Location: Colorado
|
|
| DUKFVR wrote: |
|
Thanks Nick for everything you are doing!
|
I 2nd that. |
|
|
|
|
|
 |
|
Posted:
Sat Oct 03, 2026 7:18 am
|
|
|
Member

Joined: 19 May 2006
Posts: 748
Location: Too far south in New England
|
|
Nick, I think some 1/2 oz data would be great.
Question: When a powder company publishes a load recipe are there typical spread and deviation numbers they try to meet or exceed? Or is it just stack height and goes bang? |
_________________ "You keep saying that word. I do not think it means what you think it means" - Inigo Montoya |
|
|
|
|
 |
|
Posted:
Sat Oct 03, 2026 7:50 am
|
|
|
Member

Joined: 31 Aug 2005
Posts: 1291
Location: Nebraska
|
|
| I'm among those for whom the wad doesn't work in our progressive press as the cup portion would sometimes collapse to one side. If the segment of the mold that resists such deformation can be reinforced it might eliminate that one issue. |
_________________ Bore, n. Shotgun enthusiast's synonym for "gauge" ; everybody else's synonym for "shotgun enthusiast." - Ed Zern |
|
|
|
|
 |
|
Posted:
Sat Oct 03, 2026 2:53 pm
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
Hello KGB long time no see.
Changing anything to degrade or enhance any properties of the wad is simply out of the question it is a low budget and I do mean low budget endeavor were discussing here .
I simply didn't design the wad for a personal level progressive loader , it wad designed with high speed production equipment and single stage loaders in mind.
RST commercially proved the validity of the wad in the high speed machinery department.
Sorry it is not in this universe that one to be all exist simply cannot be done .
I built the best that could be accomplished with the funds that I certainly didn't have in the first place.
Wether you folks know it or not and most wouldn't care , this development taxed me beyond the maximum allowance of funds that will never be recovered, I could have burned the money and had the same results, BUT, BUT, WAIT, I did it because old friends said I couldn't do it .
Beware of what one says sometimes you have to prove it , so thought what the heck being as I had to prove it I designed the exact wad with the exact payload attributes that I wanted to shoot , why not being as I was burning the money I might as well get what I wanted out of the ashes.
By the way part of the deal is I get 2 cases of wads every time the mold is run for my very own , yeppie.
Regards Nick |
|
|
|
|
|
 |
|
Posted:
Sun Oct 04, 2026 4:13 am
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
Back to wad design:
After taking measurements of all the commercial hulls available at the time , then we look at all the commercially available wads at the time and past wads as well.
The Gualandi wads were developed by an artist or so I am told and was indeed a work of art and I might add I love all of those wads that I have ever shot they perform wonderfully, But very restricted with the variables, ie. Column height due to powder density, amount of shot , uniformed length of hulls , internal capacity changes due to different base wads and the list goes on , but a lovely wad when things are assembled correctly to fit and finish.
The Remington line of wads were wonderful wads when paired to the correct hull and shot wonderful as well , but availability and hull changes were problematic due to the small diameter of the over the powder cup .
I am tired this morning been working long hours on a building that will house batteries for my solar room so I will probably not be able to spell correctly but you will get my jest I hope .
The wads sold by BP the trap commander line in 16 ga , I thought was a wonderful looking wad we initially bought a case of them to test , now I will go into this knowing others have had different results but this is what ole Ben Felton and found about the wad now we tried combinations galore and all I have to say for the wad is DISMAL. On paper we could get acceptable patterns but in real world use on flying targets all I have to say is that it is better than shooting rocks at the flying targets but not by much.
More to come
Regards Nick |
|
|
|
|
|
 |
|
Posted:
Mon Oct 05, 2026 6:21 am
|
|
|
Member

Joined: 24 May 2012
Posts: 369
Location: United States
|
|
I am quietly fascinated by this whole story line. Mr. Hammack thanks again for both the effort and sacrifice. I stocked up on Herter's shells when they we closing out so I have not loaded in maybe 10 yrs but I have a couple of cases of the DR-16 wads I bought years ago and will be ready when I run out of factory shells!
James |
_________________ A fine gun is nice. A fine bird dog is essential. JTF
"My degree of optimism is negotiated daily" Bill Snyder, Former Head Football Coach, Kansas State University |
|
|
|
|
 |
|
Posted:
Mon Oct 05, 2026 11:15 am
|
|
|
Member

Joined: 31 Aug 2005
Posts: 1291
Location: Nebraska
|
|
| Charles Hammack wrote: |
Hello KGB long time no see.
Changing anything to degrade or enhance any properties of the wad is simply out of the question it is a low budget and I do mean low budget endeavor were discussing here .
I simply didn't design the wad for a personal level progressive loader , it wad designed with high speed production equipment and single stage loaders in mind.
RST commercially proved the validity of the wad in the high speed machinery department.
Sorry it is not in this universe that one to be all exist simply cannot be done .
I built the best that could be accomplished with the funds that I certainly didn't have in the first place.
Wether you folks know it or not and most wouldn't care , this development taxed me beyond the maximum allowance of funds that will never be recovered, I could have burned the money and had the same results, BUT, BUT, WAIT, I did it because old friends said I couldn't do it .
Beware of what one says sometimes you have to prove it , so thought what the heck being as I had to prove it I designed the exact wad with the exact payload attributes that I wanted to shoot , why not being as I was burning the money I might as well get what I wanted out of the ashes.
By the way part of the deal is I get 2 cases of wads every time the mold is run for my very own , yeppie.
Regards Nick
|
I saw you mentioned having discussions regarding mold design, was guessing changes were part of the discussion. Apparently not. |
_________________ Bore, n. Shotgun enthusiast's synonym for "gauge" ; everybody else's synonym for "shotgun enthusiast." - Ed Zern |
|
|
|
|
 |
|
Posted:
Mon Oct 05, 2026 4:51 pm
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
KGB mold design was a major topic , your referring to wad design that was not even a consideration we cannot make it any better by changing the wad design but we sure could make it worse in a hurry, as for the design of the wad I did a fesibility and perspective study with ole Ben .
We looked at what wads were available and their primary and secondary function, this played into the decision to make the Bridgeport of wads , now many of you will ask what the heck does that mean?
A Bridgeport is a milling machine , this machine is loved by the machining community, with attachments this mill will do it all , now it doesn't do any one thing particularly stellar but it will get the job done.
Now a dedicated mill type and their are many with a heavier Ridgid frame does special types of cuts and task , but these machines are limited to what they do BEST , I didn't look for that criteria I wanted a Generalists not a specialist.
This is a world of give and take , the one that does many things in a world of limitations is much more inviting than a specific wad good for only a few loads.
Simply put is look at the options available in 12 bore , tons how many available in 16 bore not many .
I choose diversity over specialized when designing anything unless financial constraints are of no concern, then I say let's build 20 molds all specific and specialized, all one needs is MONEY.
More to come
Regards Nick
Citori 16 , I can only speak on my experience and exposure years ago on load development , today I have been away from that for so long I simply have no idea what the policy is at the powder companies.
I would bet column height and crimp is the only thing in consideration besides upper limits on pressure, I simply cannot comment beyond this , sorry I will have little to say about this as I have no influence concerning development, testing, pressures, ect.
Good question though , I given this much thought but have no input on the matter. |
|
|
|
|
|
 |
|
Posted:
Tue Oct 06, 2026 5:34 am
|
|
|
Member

Joined: 02 Feb 2007
Posts: 1891
Location: Central Missouri
|
|
Back to wad design:
Taking into consideration that not all wads perform as intended ( best intentions doesn't insure a good outcome) , only testing and this has to be meaningful testing not just saying oh it shot.
Taking a good look at the attributes of wads that already performed within acceptable limits is a very good start , folks their is a whole lot that goes into this if one is a shooter and a designer versus just a designer , a designer / engineer is concerned about is making an item that meets acceptable standards, on the other hand someone that was a competitive shooter at a fairly high level sees things differently with standards that often do not coincidence with those only interested in making a product.
To add to this we have the instances where we come into contact with ability or lack of in assessing mechanics of a given product , where one individual can achieve stellar performance from a product , with another individual using the same product with dismal results, we have to factor these variables into the equation as well.
Have to go out of time.
More to come.
Regards Nick |
|
|
|
|
|
 |
|