| Author |
Message |
| < 16ga. General Discussion ~ I SUPPOSE YOU ALL SHOULD KNOW ABOUT THIS ONE AS WELL. |
|
 Posted:
Tue Jun 17, 2008 7:56 pm
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1731
Location: Central Missouri
|
|
|
|
|
 |
|
| Posted:
Wed Jun 18, 2008 4:31 am
|
|
|
Member
Joined: 07 Jan 2008
Posts: 348
Location: Missouri
|
|
| This is better than Christmas!!! |
|
|
|
|
|
|
|
| Posted:
Wed Jun 18, 2008 4:44 am
|
|
|
Member
Joined: 09 Mar 2007
Posts: 972
Location: Keller,TX
|
|
| Now we will have the new wad in loaded ammunition to boot. Sweet! |
_________________
The joys of shooting a 16 bore are only realized when you do it. |
|
|
|
|
|
|
| Posted:
Wed Jun 18, 2008 10:22 am
|
|
|
Member
Joined: 18 Nov 2005
Posts: 398
Location: S Fl
|
|
Chas,
When you and Kevin first asked what we wanted in a wad (waaay back when), my first thought was - what we really need is a decent hull, then let the wad design follow.
I see now that you were two steps ahead of me. Good going and thank you.
Pete |
_________________
" .......you have learned patience and stubbornness and concentration on what you really want at the expense of what is there to shoot. You have learned that man can as easily be debased as ennobled by a sport....." |
|
|
|
|
|
|
| Posted:
Sat Jun 21, 2008 9:37 am
|
|
|
Joined: 05 Jun 2008
Posts: 3
|
|
| Ya Charles, tell us about the hull... What i would give for a nice durable, slick 16 gauge hull ala remington sts or AA. |
|
|
|
|
|
|
|
| Posted:
Sun Jun 22, 2008 5:08 am
|
|
|
Joined: 11 Jan 2006
Posts: 311
|
|
| Foursquare wrote: |
Chas,
When you and Kevin first asked what we wanted in a wad (waaay back when), my first thought was - what we really need is a decent hull, then let the wad design follow.
I see now that you were two steps ahead of me. Good going and thank you.
Pete
|
The announcement doesn't say Downrange will be manufacturing a hull. It says they will be "shotshell manufacturing". They could be loading with imported Cheddites.
So what about it Charles, will Downrange be loading with an imported Cheddite or will they be manufacturing their own hull? |
|
|
|
|
|
|
|
| Posted:
Sun Jun 22, 2008 6:47 am
|
|
|
Member
Joined: 02 Feb 2007
Posts: 1731
Location: Central Missouri
|
|
Hello Folks :
Yep shells will be out in the not so distant future .
As for a hull yes the Cheddites will be the first loadings but LATER ON ????????
Clay you should jump in here and help us out on these projects and you too will be put in the loop.
Regards Charles |
|
|
|
|
|
|
|
| Posted:
Sun Jun 22, 2008 3:25 pm
|
|
|
Joined: 11 Jan 2006
Posts: 311
|
|
Let me know what I can do Charles. Last time you asked for beta testers by the time I saw the post you were full up!
clay |
|
|
|
|
|
|
|
