Author |
Message |
< 16ga. General Discussion ~ Range Bag & Window Sticker + Things to make you go Hmmmm |
|
Posted:
Thu Jul 17, 2008 7:09 pm
|
|
|
Member
Joined: 01 Jul 2008
Posts: 28
Location: Eastern Reaches of the Daley Empire
|
|
A nifty little range bag and sticker arrived in the post yesterday while I was out...
That's pretty cool. Didn't even know I was getting one.
--------------------------
Got fed up trying to get a good chamber measurement and not wanting to buy a box of factory shells I can't shoot, and not getting anywhere with using OEM unfired hulls, I decided to just do a chamber cast of the dang thing.
Fortunately, I had just enough cerrosafe.
Sorry for the lack of a metric Caliper....
http://s5.photobucket.com/albums/y180/MrMisanthrope/16ga%20chamber%20cast/
(Link to Bigish pics above)
Note the 16/.410 GaugeMate, Chamber cast, 2.5" (cut down) Cheddite and 2.75" (2.735) OEM Cheddite.
The chamber obviously ends at 2.66" and the forcing cone begins at 2.31" (roughly). The diameter decrease at the forcing cone is just early enough that the .410 Gaugemate Silver won't chamber completely..
Bore: .686" Chamber .709 Base .739
Diameter begins constricting at 1.860" to .735. At 2.250" it is constricted to .732, by 2.5 is .711 and by 2.66 is .709"
SO... maybe it is a 2.5" gun after all.... |
_________________ MALUM PROHIBITUM, MALUM HABENAE REGUM EST |
|
|
|
|
|
|
Posted:
Thu Jul 17, 2008 8:22 pm
|
|
|
Member
Joined: 19 Dec 2007
Posts: 127
Location: Gold Bar. Wa.
|
|
Good thing you mentioned the sticker. I hadn't noticed it in the bottom of the bag and would have lost it. Cool looking |
|
|
|
|
|
|
|
Posted:
Fri Jul 18, 2008 2:57 am
|
|
|
Member
Joined: 27 Jun 2005
Posts: 1545
Location: Michigan
|
|
If your bores are .686", you may want to get the barrel walls measured.
I don't know what brand of gun you have, but I know a Parker 16 gauge has a bore of .662". Standard 16 gauge bore is .665"-.667". This would put your gun's bores .020" oversize. If it was a Parker, I wouldn't buy it.
Not saying your barrel walls are too thin, because I know nothing about your gun. Just giving you a little advice. Better safe than sorry. |
_________________ What one person receives without working for, another person must work for without receiving. |
|
|
|
|
|
|
Posted:
Fri Jul 18, 2008 9:45 am
|
|
|
Member
Joined: 01 Jul 2008
Posts: 28
Location: Eastern Reaches of the Daley Empire
|
|
Dave M. wrote: |
If your bores are .686", you may want to get the barrel walls measured.
I don't know what brand of gun you have, but I know a Parker 16 gauge has a bore of .662". Standard 16 gauge bore is .665"-.667". This would put your gun's bores .020" oversize. If it was a Parker, I wouldn't buy it.
Not saying your barrel walls are too thin, because I know nothing about your gun. Just giving you a little advice. Better safe than sorry.
|
It's actually been pointed out to me that because I'm such a n00b at shotguns I failed to recognise that the chamber taper I mentioned is just that - a chamber taper, and the forcing cone, which I didn't measure, is what measures out to be .686 at the "lip" of the chamber.
But no, it's not a Parker. It's a 100y/o German Drilling from Suhl. |
_________________ MALUM PROHIBITUM, MALUM HABENAE REGUM EST |
|
|
|
|
|
|
Posted:
Fri Jul 18, 2008 11:52 am
|
|
|
|
I sent in my membership (finally) and was quite pleased with the quality of the bag. I'm hesitant to put the various sportsman organizations that I belong to because it seems like a good advertisement for "rip me off" when I have my truck parked...
BTW, how do you get the emblem by your name to show that you're part of the 16 Gauge Group???
Thanks |
|
|
|
|
|
|
|
Posted:
Fri Jul 18, 2008 12:09 pm
|
|
|
Member
Joined: 01 Jul 2008
Posts: 28
Location: Eastern Reaches of the Daley Empire
|
|
Terry Imai wrote: |
I sent in my membership (finally) and was quite pleased with the quality of the bag. I'm hesitant to put the various sportsman organizations that I belong to because it seems like a good advertisement for "rip me off" when I have my truck parked...
BTW, how do you get the emblem by your name to show that you're part of the 16 Gauge Group???
Thanks
|
16ga will send an email/PM you and you answer his questions. Doesn't take too long. |
_________________ MALUM PROHIBITUM, MALUM HABENAE REGUM EST |
|
|
|
|
|
|