16ga.com ~ View topic

Joined: 06 Aug 2009 Posts: 960

Hi All,

I was looking through some data and I found some 2 9/16" (67 mm) loads in Low Brass Blue Fiocchi hulls. All loads were tested with 5 shot data strings.

Date 6/8/2000 Temp 68 F BAR 30.12 RH 57%
Chronograph - Oehler M-35P Skyscreen III
PCB Piezotronics Charge Ampilfier, Digital Voltmeter and Transducer
Test Receiver - D&H Tooling Universal
Test Barrel - H-S Precision 16 Gauge 2 3/4" Chamber, 30" Length, .005 Choke

#1
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 21.0 grs. IMR PB
Wad - B&P 16 Gauge (PR Inc. #TUWZ2M16GA) + 24 ga. .125 card wad
Shot - 7/8 oz. #7 1/2 lead

FPS - 1,257 SD 11 EV 26
PSI - 7,640 SD 261 EV 600

#2
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 19.0 grs Alliant Unique
Wad - B&P 16 Gauge (PR Inc. #TUWZ2M16GA)
Shot - 1 oz. #7 1/2 lead

FPS - 1,146 SD 9 EV 19
PSI - 6,880 SD 277 EV 700

#3
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 20.5 grs Alliant Unique
Wad - B&P 16 Gauge (PR Inc. #TUWZ2M16GA)
Shot - 1 oz. #7 1/2 lead

FPS - 1,220 SD 8 EV 22
PSI - 8,020 SD 249 EV 600

#4
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 20.0 grs. IMR SR7625
Wad - B&P 16 Gauge (PR Inc. #TUWZ2M16GA)
Shot - 1 oz. #7 1/2 lead

FPS - 1,138 SD 8 EV 22
PSI - 6,940 SD 220 EV 600

#5
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 21.5 grs. IMR SR7625
Wad - B&P 16 Gauge (PR Inc. #TUWZ2M16GA)
Shot - 1 oz. #7 1/2 lead

FPS - 1,203 SD 8 EV 23
PSI - 7,800 SD 200 EV 500

#6
Hull - Fiocchi 16 ga 67mm
Primer - CCI 209
Powder - 22.0 grs. IMR 800-X
Wad - Remington SP-16
Shot - 1 1/8 oz. #7 1/2 lead

FPS - 1,260 SD 10 EV 23
PSI - 10,200 SD 277 EV 700

I originally came up with these loads for my M-12 with the 2 9/16" chamber, they run thru it just fine. They did function my Sweet Sixteen and my 1100 reliably.

Mark,

I'm assuming these are all fold crimped?

Thanks.

Joined: 06 Aug 2009 Posts: 960

Yes they are, all fold crimp.