16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  16g field loads for older guns
terc
PostPosted: Tue Mar 28, 2006 10:01 am  Reply with quote



Joined: 11 Mar 2006
Posts: 18
Location: Central PA

Hi, I'm new to this board,and I'm sure this is a repeat question,but a few opinions would be greatly appreciated.
I have a 1929 16ga Fox with 2 3/4 chambers.I'm not sure if they are the original length.
I like to use 1 oz loads for grouse and woodcock.I don't reload.
What do most knowing members use for this purpose.
Kent Gamebore game/hunting loads are rated at 8122 lbs/sq" is that low enough or can I do better ?
Thanks Dave
Back to top
View user's profile Send private message
Larry Brown
PostPosted: Tue Mar 28, 2006 3:52 pm  Reply with quote
Member
Member


Joined: 26 Apr 2005
Posts: 743

Dave, those Kent Gamebores will work fine. Matter of fact, with a Sterlingworth, even if the chambers have been lengthened, so will any American-made 1 oz load. Those guns were built strong enough to take it. In fact, after Savage bought out Fox, any time a Fox came in for repairs or alterations, the Savage gunsmiths would automatically lengthen short chambers to 2 3/4".
Back to top
View user's profile Send private message
TJC
PostPosted: Tue Mar 28, 2006 4:52 pm  Reply with quote
Member
Member


Joined: 20 Mar 2005
Posts: 1522
Location: NH

Larry,
Was there a date when all the chambers were produced at 23/4's? Just wondering.

Thanks

_________________
A bad day of hunting is better than a good day of work.
Back to top
View user's profile Send private message
terc
PostPosted: Tue Mar 28, 2006 8:13 pm  Reply with quote



Joined: 11 Mar 2006
Posts: 18
Location: Central PA

Larry, I know Fox guns are strong.This one has 28" barrels with 14.5" stock and still weighs in at 6 lbs. I think I should stay on the safe side with low pressure ammo.
Thanks Dave
Back to top
View user's profile Send private message
Larry Brown
PostPosted: Wed Mar 29, 2006 1:12 pm  Reply with quote
Member
Member


Joined: 26 Apr 2005
Posts: 743

Terc, the main thing you need to worry about with a lightweight American gun is recoil, which is going to impact the stock. Pressure impacts the barrels and action, and those are the stronger parts of those old guns. And the way to reduce recoil (AND pressure) is to go to light, 7/8 oz reloads. You will notice a significant difference in comparison to American factory ammo.

I'm not certain when Savage went to the 2 3/4" chamber as standard for the 16. The problem with short chamber vs long in American guns is that not all the companies changed at the same time, and individual companies did not convert all gauges at the same time. For example, Hunter Arms (LC Smith) 16's were still chambered at the old, short 2 9/16" length until about 1940 or so. But their 12's and 20's had been converted to 2 3/4" some years before that.

Basically, with an old American double, if it isn't marked 2 3/4", then it probably isn't 2 3/4"--or didn't start life as a 2 3/4" gun, although the chambers may well have been lengthened by some gunsmith.
Back to top
View user's profile Send private message
TJC
PostPosted: Wed Mar 29, 2006 5:31 pm  Reply with quote
Member
Member


Joined: 20 Mar 2005
Posts: 1522
Location: NH

Larry,
Thanks for the info.

_________________
A bad day of hunting is better than a good day of work.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09