| Author |
Message |
| < 16ga. Ammunition & Reloading ~ Load Data for 2-1/2" With WAA16 wads? |
|
 Posted:
Sat Feb 04, 2012 5:04 pm
|
|
|
Joined: 07 Jul 2011
Posts: 61
Location: Ohio, Illinois
|
|
| I have some load data that i was able to get regarding the Chidette Sp?halls and the WAA16 wads but im not sure if its for the 2-1/2" halls or for the standard 2-3/4" and one have info/>? |
|
|
|
|
|
 |
|
| Posted:
Sat Feb 04, 2012 5:08 pm
|
|
|
Member
Joined: 02 Oct 2007
Posts: 1975
|
|
| What is the load? Don't know of any 2 1/2" cheddite loads using the WAA16 wad. |
|
|
|
|
|
|
|
| Posted:
Sat Feb 04, 2012 5:14 pm
|
|
|
Joined: 07 Jul 2011
Posts: 61
Location: Ohio, Illinois
|
|
thats the prob i dont know if its for a 2-3/4" or 2-1/2"
Cheddite 1 oz. Universal 19.5 Fio 616 WAA16 1165 8,000 Hodgdon Web
Cheddite 1 oz. Universal 19.9 Ched 209 WAA16 1165 7,100 Hodgdon Web
Cheddite 1 oz. Universal 20.5 Fio 616 WAA16 1220 8,900 Hodgdon Web
Cheddite 1 oz. Universal 21.2 Ched 209 WAA16 1220 8,300 Hodgdon Web
Cheddite 1 oz. Universal 22 Fio 616 WAA16 1275 10,300 Hodgdon Web
Cheddite 1 oz. Universal 22.2 Ched 209 WAA16 1275 9,000 Hodgdon Web
Cheddite 1 oz. 800X 23 Win209 WAA16 1350 11,200 My Load |
|
|
|
|
|
|
|
| Posted:
Sat Feb 04, 2012 5:59 pm
|
|
|
Joined: 10 Feb 2011
Posts: 217
Location: Pacific Northwest
|
|
Those are the loads listed for the 2-3/4" hulls.
However, when I tried to use Universal in these loads I had to add 28Ga 0.125" cards in the WAA16 shot cup to get enough volume to crimp; and even then it was pretty deep. You might want to give these a try in the 2-1/2" hull and see how they fit. |
_________________
Matt
Nothing makes a gun more effective than practice. |
|
|
|
|
|
|
| Posted:
Sat Feb 04, 2012 6:30 pm
|
|
|
Joined: 28 Mar 2008
Posts: 1460
Location: Eagle, Nebraska
|
|
| Hull length won't matter, in fact might help with the crimping? |
|
|
|
|
|
|
|
| Posted:
Sun Feb 05, 2012 7:52 am
|
|
|
Member
Joined: 02 Oct 2007
Posts: 1975
|
|
| 22 grains of universal with a 1 oz load in a WAA16 wad will have to be roll crimped if used in a 2 1/2" hull. I've used this load and all you have to do is adjust the pre crimp in a 2 3/4" hull. The same thing with the 800X load. |
|
|
|
|
|
|
|
| Posted:
Mon Feb 06, 2012 1:36 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9464
Location: Amarillo, Texas
|
|
|
|
|
|
|
