16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Crimps ?
Dave Miles
PostPosted: Wed Aug 02, 2006 5:40 am  Reply with quote
Member
Member


Joined: 27 Jun 2005
Posts: 1545
Location: Michigan

If you where going to be loading some new plastic hulls, that had never been crimped. Would you go with 6 or 8 point crimp? and Why? Confused
Back to top
View user's profile Send private message
old16
PostPosted: Wed Aug 02, 2006 8:10 am  Reply with quote
Member
Member


Joined: 01 Feb 2006
Posts: 450
Location: Indiana

Dave
I like the six star crimp for my preference. I seems to me that the crimp stays more uniform after several rounds.
Most of mine are 8 star from my single formed AA hulls.But when I load with brand new hull I stay with 6 star.

_________________
Anyone that is willing to give up anypart of freedom for a piece of security deserve neither.
Ben Franklin
Back to top
View user's profile Send private message Send e-mail
woodcock
PostPosted: Wed Aug 02, 2006 10:50 am  Reply with quote
Member
Member


Joined: 28 Oct 2005
Posts: 665
Location: Louisiana

Six point crimp will be easier and involve less 'trauma' to the shell mouth. For new hulls I would strongly recommend that you use the all brass CRIMP STARTER offered by Cabela's (or Ballistic Products). Crimps will be significantly better on new hulls using this tool.
Back to top
View user's profile Send private message
brdhnt
PostPosted: Wed Aug 02, 2006 1:25 pm  Reply with quote
Member
Member


Joined: 19 Aug 2005
Posts: 184
Location: Concordia, Kansas

Dave,

I presume you are going to be using either new Fiocchi or the BPI Multi-Hulls since those are the only new hulls out on the market.

If you are not going to be using one of the separate crimp starters, then the six point crimp is the way to go. I did about 500 BPI's and about 200 Fiocchi's last year. I experimented with both 6 and 8 point crimps and both hulls worked better with 6 point. I ran the shell up into the crimp starter twice before doing final crimping. As stated earlier, there is not as much stress on the hull with a 6 point crimp.

Since then, I have bought one of the crimp starters in 6 point. It makes a little more uniform crimp, but I am not sure that it was worth the money and the extra step involved. You will have to try yourself, but I would try the hulls in your reloader first. I did my cases on a single stage machine where I could double start the cases in the crimp starter. If you are using a progressive machine, then the separate crimp starter would be the way to go.

MHO

TMB
________
LAMBORGHINI ISLERO SPECIFICATIONS


Last edited by brdhnt on Sat Feb 26, 2011 8:54 pm; edited 1 time in total
Back to top
View user's profile Send private message
hoashooter
PostPosted: Wed Aug 02, 2006 5:30 pm  Reply with quote
Member
Member


Joined: 08 Nov 2005
Posts: 3436
Location: Illinois

The only 8's I use are the old AA style.The 6's are much easier to use and load--Remington Game Load is another fine choice Wink
Back to top
View user's profile Send private message
offhand35
PostPosted: Thu Aug 03, 2006 4:30 am  Reply with quote
Member
Member


Joined: 04 Feb 2005
Posts: 191
Location: Western Connecticut

I have found that 8 point crimps on new hulls have not turned out very well. I had some crushed shells, and the folds did not come out well.
MUCH better success with the 6 fold!

Cabelas offers a Super Crown Crimp Starter for the MEC for $24.99, which I plan to get to use for my new lot of Cheddite 2 1/2" hulls.
It is item # IG-215840, link below:

http://www.cabelas.com/cabelas/en/templates/purchase/products-found.jsp?_requestid=5571

_________________
.....SQUIRREL, the OTHER dark meat.....
Back to top
View user's profile Send private message
Dave Miles
PostPosted: Thu Aug 03, 2006 6:21 am  Reply with quote
Member
Member


Joined: 27 Jun 2005
Posts: 1545
Location: Michigan

I just ordered the 6 point Brass crimp starter, and a 7/8 oz. charge bar.
I too, am using it on the new 2-1/2" Cheddite hulls.
I'll post later on how it works.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09