Author |
Message |
< 16ga. Ammunition & Reloading ~ New to shotshell reloading |
|
Posted:
Fri Nov 21, 2014 7:49 pm
|
|
|
Joined: 21 Nov 2014
Posts: 15
Location: Denver, CO
|
|
I've been reloading for rifle for a little while now, but recently picked up a used 16 gauge Sizemaster. Finding powders has been a problem, but I've located 700x, 800x, and SR4756. Will any of these work for loading 1 oz. of Nice Shot? I haven't collected any other components, other than some bulk Nice Shot #5 that I plan to use on ducks, and some #2 for geese. Can anyone direct me to some load data for any of these powders so I can see if I can find the other components? Thanks.
Charles |
|
|
|
|
|
|
|
Posted:
Fri Nov 21, 2014 8:22 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas
|
|
|
|
|
|
|
Posted:
Fri Nov 21, 2014 8:43 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
|
|
|
|
|
Posted:
Fri Nov 21, 2014 8:49 pm
|
|
|
Joined: 21 Nov 2014
Posts: 15
Location: Denver, CO
|
|
Thanks for the link. I've sent my request to join the group. |
|
|
|
|
|
|
|
Posted:
Sat Nov 22, 2014 5:34 am
|
|
|
Member
Joined: 06 Oct 2007
Posts: 2346
Location: West MI
|
|
Welcome aboard, best of luck in your new hobby. If not already aware of component suppliers, Ballistic Products and Precision Reloading are two that I use with no complaints.
Regarding 4756 powder; no, wont work and absolutely the worst powder ever made and now discontinued, you need to box it up and ship it to me so I can dispose of it properly... just kidding, IMO, great stuff and should work fine for what your intended use. Metered great, low volume, burned squeaky clean, I'd love to know why they discontinued it...
Again welcome |
_________________ Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up. |
|
|
|
|
|
|
Posted:
Sat Nov 22, 2014 3:58 pm
|
|
|
Joined: 12 Sep 2014
Posts: 70
Location: Highland, IL
|
|
Charles are you loading steel for geese? If so you will need a steel reloader, and you want to watch shooting steel in a choked barrel. I/C or MOD barrels only for steel. |
_________________ Browning Sweet 16
Ithaca 37 in 16ga.
Citori 24" bbl in 16ga.
Citori 28" bbl in 16 ga.
BPS Medallion in 16 ga
Ithaca Double bbl in 16 ga.
BPS in 16 ga. |
|
|
|
|
|
|
Posted:
Sat Nov 22, 2014 6:34 pm
|
|
|
Joined: 21 Nov 2014
Posts: 15
Location: Denver, CO
|
|
I'm not shooting steel. I picked up the reloader in part so that I could start reloading with Nice Shot. |
|
|
|
|
|
|
|
Posted:
Sat Nov 22, 2014 11:30 pm
|
|
|
Joined: 21 Nov 2014
Posts: 15
Location: Denver, CO
|
|
Ok. So I can find components to make 1oz. or 1 1/8 oz. loads of Nice Shot using either 4756 or 800x. Which powder would you recommend and why? Thanks!
Charles |
|
|
|
|
|
|
|
Posted:
Sun Nov 23, 2014 7:56 am
|
|
|
Member
Joined: 22 Aug 2011
Posts: 1498
Location: the Moosehorn
|
|
I have used 4756 for 40 years and I like it. 800X has to be measured on a scale because it does not flow well through drop tubes. It is large flakes. I saw A vid of the owner of Hodgdon talking about rebranding IMR powders to the Hodgdon name, so IMR 4756 will be labeled Hodgdon 4756. very same powder. |
_________________ ALWAYS wear the safety glasses
If you take Cranberries and stew them like applesauce they taste much more like Prunes than Rhubarb does ----G.M/ |
|
|
|
|
|
|
Posted:
Sun Nov 23, 2014 8:09 am
|
|
|
Joined: 07 Apr 2007
Posts: 1624
Location: northwewst Wyoming
|
|
Re SR4756:
It is my favorite 16 GA powder for 1 oz. and 1 1/8 oz loads. I have performed extensive pattern and penetration tests and couldn't be happier. They also perform well in sub 0 temps. The loads were recommended by Tom Armbrust after he performed pressure tests. |
|
|
|
|
|
|
|
Posted:
Mon Nov 24, 2014 8:36 am
|
|
|
Joined: 28 Aug 2014
Posts: 924
Location: Eastern Tennessee
|
|
seem to be a lot of us Charlie's running around this place |
_________________ 16' Brown A5
15' Brown White Light Citori
13' Brown Upland Spcl BPS
02' Rem 870 Exp
53' Rem 870 Wing
53' Mar 90 DT
50' Mar 90 DT
47' Rem 31L
46' Win 12 (2)
33' Rem 31 |
|
|
|
|
|
|
Posted:
Mon Nov 24, 2014 9:59 am
|
|
|
Joined: 21 Nov 2014
Posts: 15
Location: Denver, CO
|
|
Thanks to everyone for their thoughts. I'm going to pick up some 4756 today. |
|
|
|
|
|
|
|