16ga.com ~ View topic

Joined: 08 Mar 2008 Posts: 41 Location: Tor.Ont.Canada

Have about 75 hulls never reloaded. Any help on data for imperial hulls high brass.

Joined: 21 May 2010 Posts: 603 Location: Victoria BC Canada

I found some fired Imperial 16 ga. hulls in the burn barrel. Some were so old that the bases had split. I trimmed the ragged case mouths to 2.5" and used a Hartin Crimp.

I reloaded with a generic load, mostly with SP16 wads but DRs also work. Don't firewall it. If you don't want to try it, I'd be interested in buying them.

Joined: 08 Mar 2008 Posts: 41 Location: Tor.Ont.Canada

The hulls r in good shape 1 fired
Gooding to try 209 fed
sp16
24gr longshot
1oz shot
thanks Carlos

Joined: 21 May 2010 Posts: 603 Location: Victoria BC Canada

Have you joined the 16 gauge group? it's free upon application and tells you EVERYTHING!

https://mail.google.com/mail/u/0/?view=cm&fs=1&tf=1&source=mailto&to=reloading16gauge-subscribe@yahoogroups.co.uk

I happen to have a large quantity of HERCO which is one of the listed powders for CANUCK hulls and the SP16.

(This is the response that I should have made first!) ALWAYS go with data from a reliable source.

Perhaps I am letting the cat out of the bag, but without the following data I might have misled you; This is all that was listed for this hull and the SP16.

Canuck 1 oz Herco 20.0 CCI 109 Rem SP-16 1155 7,500 Lymans 3rd
Canuck 1 oz Herco 23.5 CCI 109 Rem SP-16 1310 10,000 Lymans 3rd
Canuck 1 1/8 oz 571 29.0 CCI 109 Rem SP-16 1220 10,000 Lymans 3rd
Canuck 1 1/8 oz HS 7 31.0 CCI 109 Rem SP-16 1230 10,200 Lymans 3rd

Joined: 08 Mar 2008 Posts: 41 Location: Tor.Ont.Canada

Thanks carlos I have 1lb of Herco
trying something just a few loads