16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  Favorite load
readgriff
PostPosted: Wed Jan 28, 2015 6:07 am  Reply with quote



Joined: 06 Jun 2008
Posts: 117

What is your favorite 1oz load or 7/8 with Cheddite hull.
I've been using 21.9 universal powder with Sg 16 wad 1oz 8 shot Fiocchi primer around 1250 FPS.

Wonder what everyone else likes for skeet and light birds.
Thanks
Readgriff
Back to top
View user's profile Send private message
16'er
PostPosted: Wed Jan 28, 2015 6:30 am  Reply with quote
Member
Member


Joined: 08 Oct 2006
Posts: 1395
Location: Tappahannock, Virginia

http://www.16ga.com/forum/viewtopic.php?t=17033
Back to top
View user's profile Send private message
Dogchaser37
PostPosted: Wed Jan 28, 2015 8:24 am  Reply with quote
Member
Member


Joined: 08 Aug 2011
Posts: 1946
Location: Central CT

2 3/4" Green Cheddite hull
Winchester 209 primer
22.0 grains Universal powder
B & P 16 gauge wad
1 oz lead shot

1,300 FPS 10,100 PSI
_____________________________________________________

2 3/4" Green Cheddite hull
Winchester 209 primer
23.0 grains Universal powder
DR-16 wad
7/8 oz lead shot

1,424 FPS 11,100 PSI

I typically don't use either of these loads for hunting, but they crush targets just fine.

_________________
Mark
Back to top
View user's profile Send private message
readgriff
PostPosted: Thu Jan 29, 2015 5:11 am  Reply with quote



Joined: 06 Jun 2008
Posts: 117

Dog Chaser
Wow that 7/8 once load has some punch.
I will have to buy some DR 16 wads and try that load with less powder.
Where did you get you pressure # from?
Thanks
Readgriff
Back to top
View user's profile Send private message
Dogchaser37
PostPosted: Thu Jan 29, 2015 4:50 pm  Reply with quote
Member
Member


Joined: 08 Aug 2011
Posts: 1946
Location: Central CT

The loads were tested by both Tom Armbrust and Precision Reloading, with both getting very similar numbers. The numbers you see are from the Tom Armbrust test.

You can back the 7/8 oz. load down 2 full grains with no problems.

_________________
Mark
Back to top
View user's profile Send private message
readgriff
PostPosted: Thu Jan 29, 2015 4:57 pm  Reply with quote



Joined: 06 Jun 2008
Posts: 117

Thanks dogchaser for the information
I was looking for a 7/8 load that has a lower pressure and still has FPS.
I will have to load some with 21 grains.
Thanks
Back to top
View user's profile Send private message
readgriff
PostPosted: Sun Feb 01, 2015 6:36 am  Reply with quote



Joined: 06 Jun 2008
Posts: 117

I thought I would load some 7/8 oz loads with DR wads and universal powder but they seem to all sold out of DR wads with all the popular reloading sites.
Anybody know where I can order some wads?
Thanks
Readgriff
Back to top
View user's profile Send private message
Charles Hammack
PostPosted: Sun Feb 01, 2015 7:30 am  Reply with quote
Member
Member


Joined: 02 Feb 2007
Posts: 1731
Location: Central Missouri

If you cannot find any, holler I have a bag from my personal stash that I can send you.

Regards Nick
Back to top
View user's profile Send private message Send e-mail
John Singer
PostPosted: Sun Feb 01, 2015 7:38 am  Reply with quote



Joined: 03 Sep 2014
Posts: 398
Location: Rochester, MN

My favorite 16 gauge target load is 7/8 oz of shot with 14 grains of 700X powder. I have loaded this with either the DR16 wad when I can get it or with the CB0100-16 wad. With the CB0100-16 wad, I use bird seed or oat meal as a filler.

This load performs well in Cheddite hulls but very poorly in Remington hulls.

_________________
John Singer
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09