16ga.com ~ View topic

Joined: 20 Aug 2014 Posts: 25

Has anybody here have access to one ? I have a few questions.
Thanks, Rob.

*Last edited by skeettx on Wed May 13, 2015 4:49 pm; edited 1 time in total*

Rob

http://pacificreloaders.awardspace.com/Pacific%20350.htm

Mike

Joined: 20 Aug 2014 Posts: 25

skeettx, thank you for the link. I saw what I have but not what I needed. I have some parts missing and need measurements.

*Last edited by skeettx on Thu May 14, 2015 10:19 am; edited 1 time in total*

Specify and maybe we can assist
Mike

p.s.Maybe Hornady still has some parts in the bins Smile

http://www.hornady.com/assets/files/manuals-discontinued/shotshell-reloading/Pacific-DL-350-Loader.pdf

Long shot here
http://gulfcoastgunforum.com/showthread.php?10794-Shotshell-Reloader-Pacific-DL-350-12-20

Joined: 20 Aug 2014 Posts: 25

Again thank you but both are dead ends. The parts that I need info about is the primer rod that is on the back left acting on the leaver under the shell plate and the primer rod that the leaver presses up to seat the primer. I have the leaver but nothing else.

*Last edited by skeettx on Thu May 14, 2015 2:58 pm; edited 1 time in total*

OK
Now according to the manual (above) , what part numbers do you need?
Mike

AND HOPE

You may get this one CHEAP and have all the spare parts you need

http://www.ebay.com/itm/pacfic-hornady-reloading-press-350-with-12ga-16ga-dies-complete-plus-extras-/271869716056?pt=LH_DefaultDomain_0&hash=item3f4cb2a658

AND if you are NOT going to bid on it, please let the rest of us know please.

Joined: 20 Aug 2014 Posts: 25

The 350 is close but mine is like the 366. The 360 does not auto rotate like the 366 but every thing else works like it.

I'm going to pass this one up, so good luck to whoever bids on it.

OK
Yes, my bad
I do not plan on bidding on it but it DOES have 16 gauge die set Very Happy

Some of y'all may be interested
Mike