Author |
Message |
< 16ga. Ammunition & Reloading ~ Tested loads |
|
Posted:
Mon Aug 03, 2015 12:44 pm
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2169
Location: Florida
|
|
I was sending Tom some 10ga loads to be tested so I decided to include these loads also .
Why ?
There was an earlier post about using International for 1oz . I knew it would work but , there isn't much tested data for it . The only other data I have ever seen was for 1200 fps and that's generally faster than I like for clays and most hunting .
With the 800x load I was looking for a low pressure 2 9/16 " 1oz load ( below 7000 psi and between 1100- 1200 fps ) for hunting with my Damascus barreled guns. Not sure if it had to do with the efficiency of the short hull but I reduced this load down from a 2 3/4 " 23gr load and figured I would get there , wrong. It didn't lose much velocity or much pressure . I am still working on this load . Good news is it's very consistent and should make a good hunting load with Niceshot or lead.
The last 2 loads were just out of curiosity form something 16GG said about both powders being volumetrically equal . Although 3 shots is not real good data , it seems he may be right . There close . |
|
|
|
|
|
|
|
Posted:
Tue Aug 04, 2015 1:35 am
|
|
|
Member
Joined: 06 Oct 2007
Posts: 2349
Location: West MI
|
|
Thanks for sharing, always nice to see some new useful 16ga data. That 800x load looks pretty nice on paper. I cant see the powder amount clearly; is it 20gr?
Fellow 10ga fan here; whatcha shootin for with the 10ga loads? Care to share that data? |
_________________ Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up. |
|
|
|
|
|
|
Posted:
Tue Aug 04, 2015 3:44 am
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2169
Location: Florida
|
|
putz463 , Yes 20gr on the 800X
The 10ga loads are 2 7/8' Lead and Bismuth , they are not low pressure . If you want them let me know and I will send them to you . |
|
|
|
|
|
|
|
Posted:
Tue Aug 04, 2015 3:48 am
|
|
|
Member
Joined: 06 Oct 2007
Posts: 2349
Location: West MI
|
|
Thought that looked like 20gr, thanks for confirming. Certainly I'd like more 10ga recipes in my collection, I'll send PM, thanks! |
_________________ Sorry, I'm a Duck Hunter so shouldn't be held strictly responsible for my actions between Oct 1st and ice up. |
|
|
|
|
|
|
Posted:
Tue Aug 04, 2015 7:42 am
|
|
|
Member
Joined: 09 Sep 2014
Posts: 105
Location: Virginia
|
|
I have a few 10 G loads too, one I use the most is a target load 1 1/8 oz shot will send it to you via PMail
Boats |
|
|
|
|
|
|
|
Posted:
Tue Aug 04, 2015 10:25 am
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2169
Location: Florida
|
|
Boats , I am interested in the 1 1/8oz load if you don't mind
Thanks |
|
|
|
|
|
|
|
Posted:
Fri Aug 07, 2015 9:34 am
|
|
|
Joined: 28 Jan 2012
Posts: 89
|
|
is that 13.6 grains on the green dot load? |
|
|
|
|
|
|
|
Posted:
Fri Aug 07, 2015 11:07 am
|
|
|
Member
Joined: 09 Jan 2013
Posts: 2169
Location: Florida
|
|
matt wrote: |
is that 13.6 grains on the green dot load?
|
yes |
|
|
|
|
|
|
|