Author |
Message |
< 16ga. Ammunition & Reloading ~ recipe for winchester hulls |
|
Posted:
Mon Aug 17, 2015 2:58 pm
|
|
|
Joined: 16 Aug 2015
Posts: 23
Location: USSR of NJ
|
|
Its been a looooong while since I've been on the forum. I used it mostly for 16 reloading ideas. I bought a MEC 600 jr got it set up and powder dried up everywhere around here. I just got my hands on some unique and Im looking for a 1oz recipe for Winchester poly hulls to use in a 1927 Fox SXS
I used to look it up on a 16 spreadsheet website but I cant find it???
Can anyone help.
Thank You, |
_________________ Matthew 25:31-46 |
|
|
|
|
|
|
Posted:
Mon Aug 17, 2015 3:05 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas
|
|
Hello
And
WELCOME back
Go here, enroll, wait to be approved, then enjoy the site
When you have been approved, click on FILES
http://uk.groups.yahoo.com/group/reloading16gauge/
Mike |
Last edited by skeettx on Mon Aug 17, 2015 3:53 pm; edited 1 time in total |
|
|
|
|
|
|
Posted:
Mon Aug 17, 2015 3:37 pm
|
|
|
Joined: 16 Aug 2015
Posts: 23
Location: USSR of NJ
|
|
I signed up, when I log on nothing works????
When I click on files nothing happens?[/b] |
_________________ Matthew 25:31-46 |
|
|
|
|
|
|
Posted:
Mon Aug 17, 2015 3:53 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas
|
|
wait to be approved |
Last edited by skeettx on Tue Aug 18, 2015 4:15 pm; edited 1 time in total |
|
|
|
|
|
|
Posted:
Tue Aug 18, 2015 4:05 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
|
|
|
|
|
Posted:
Tue Aug 18, 2015 4:15 pm
|
|
|
Member
Joined: 15 Apr 2007
Posts: 9463
Location: Amarillo, Texas
|
|
Sorry for your loss
Good to have you back
Mike |
_________________
,
USAF RET 1971-95 |
|
|
|
|
|
|
Posted:
Tue Aug 25, 2015 9:30 am
|
|
|
Joined: 16 Aug 2015
Posts: 23
Location: USSR of NJ
|
|
Thank you very much !
I went on and couldn't find more than a couple recipes for Winchester hulls. only two using Alliant Unique ?
Last time I was on (before Yahoo?) the spreadsheet had many, many recipes.
I'm probably doing something wrong, but am not sure what, HELP ? |
_________________ Matthew 25:31-46 |
|
|
|
|
|
|
Posted:
Tue Aug 25, 2015 3:08 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
Garvfam1 wrote: |
Thank you very much !
I went on and couldn't find more than a couple recipes for Winchester hulls. only two using Alliant Unique ?
Last time I was on (before Yahoo?) the spreadsheet had many, many recipes.
I'm probably doing something wrong, but am not sure what, HELP ?
|
What files are you looking at? There are quite a few loads using Unique under win poly formed hulls and under cheddite. If you are having troubles look at the spreadsheet for powders. And open the tab for unigue. The zls files are for excel and the ods files are for open office.
Also if a person wants to he could use the loads for unique that are listed under the Win cf hull in the poly hulls. Will just have less pressure.
If you are having problems email me and I will try and figure out your problem.
You can also just post a message out on the site and I will get it. |
_________________ http://uk.groups.yahoo.com/group/reloading16gauge/
Minnesota Gun Owners http://gocra.org/ |
|
|
|
|
|
|
Posted:
Wed Aug 26, 2015 11:41 am
|
|
|
Member
Joined: 08 Jun 2009
Posts: 321
Location: So Cal
|
|
You can get shotgun loading information on the Hodgdon.com website. It has ballistic loading tables for almost everything and includes Hodgdon, IMR and Winchester powders (which it all makes or procures). Its also good for rifle and pistol load information. |
|
|
|
|
|
|
|
Posted:
Sat Aug 29, 2015 8:33 pm
|
|
|
Joined: 16 Jul 2015
Posts: 2126
Location: Hudson,Wy
|
|
There was an 800-x spreadsheet link posted here dated 2009. I have yet to gain access to it, no longer published. Perhaps this is one of the sheets mentioned above. |
_________________ Only catch snowflakes on your tongue AFTER the birds fly south for the winter... |
|
|
|
|
|
|
Posted:
Sun Aug 30, 2015 7:18 pm
|
|
|
Joined: 23 Aug 2009
Posts: 295
Location: Southern Ontario
|
|
Garvfam1...PM me and I'll send you a bunch of recipes.
Don. |
_________________ 1959 16ga. Antonio Zoli sxs 28"
1949 16ga. Model 12 28" |
|
|
|
|
|
|
Posted:
Wed Sep 02, 2015 6:42 pm
|
|
|
Joined: 16 Aug 2015
Posts: 23
Location: USSR of NJ
|
|
I MUST be doing something wrong, I just went through all the 16ga files in the "Files" section and only found 3 recipes for WIN CF and none for win PF using unique. Most of the pages have NO data at all, just a "read this before using" section. What am I doing wrong ??? |
_________________ Matthew 25:31-46 |
|
|
|
|
|
|
Posted:
Wed Sep 02, 2015 8:23 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
|
|
|
|
|
Posted:
Thu Sep 03, 2015 3:12 pm
|
|
|
Joined: 16 Aug 2015
Posts: 23
Location: USSR of NJ
|
|
Thank you VERY VERY VERY VERY VERY much !
Still not sure why I couldn't find it ?
PS when you think Minnesota has gone too far, we'll welcome you into New Jersey.
You'll long for Minnesota after a week in good ole NJ |
_________________ Matthew 25:31-46 |
|
|
|
|
|
|
Posted:
Fri Sep 18, 2015 7:04 pm
|
|
|
Joined: 22 Dec 2004
Posts: 173
Location: S. E. Arizona
|
|
Garvfam1 wrote: |
I MUST be doing something wrong, I just went through all the 16ga files in the "Files" section and only found 3 recipes for WIN CF and none for win PF using unique. Most of the pages have NO data at all, just a "read this before using" section. What am I doing wrong ???
|
If you PM me with your e-mail addy, I will send you the ORIGINAL load database spreadsheets that I created for 16 gauge reloading people. No sign up, no cost. |
_________________ Country to hunt, my setters, and a Fox 16 gauge...
|
|
|
|
|
|
|