| Author |
Message |
| < 16ga. Ammunition & Reloading ~ Working on a new 16 Ga load Spreadsheet need help |
|
 Posted:
Wed Jul 20, 2016 6:20 pm
|
|
|
Member
Joined: 24 May 2012
Posts: 353
Location: United States
|
|
| Quote: |
Jake,
As long as you have George's blessing it is fine with me. If you have any questions, I'd be happy to help.
|
Based on my PM conversation with George he does so I am certainly on board and will help if I can.
James
Former Manhattanite |
_________________
A fine gun is nice. A fine bird dog is essential. JTF
"My degree of optimism is negotiated daily" Bill Snyder, Former Head Football Coach, Kansas State University |
|
|
|
|
 |
|
| Posted:
Wed Jul 20, 2016 7:24 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
| Quote: |
| CB0100-16 is a clone and is a direct substitute for Winchester WAA16 also listed as WWA16
|
If you compare both of these wads you will find a little difference. Have a bag of the original and they are a hair smaller at the base. If you use the old ones in a clear straight walled hull and turn it upside down you can watch the powder run down the sides. The newest version is not quite as bad. |
_________________
http://uk.groups.yahoo.com/group/reloading16gauge/
Minnesota Gun Owners http://gocra.org/ |
|
|
|
|
|
|
| Posted:
Wed Jul 20, 2016 7:34 pm
|
|
|
Member
Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota
|
|
| As far as the spreadsheets. Even though this new spreadsheet maker does not want to take over the group. I am still going to quit. So if anybody else wants to take it over let me know. I will not have the time to keep up with all the new loads that should be entered. It takes time. I have other obligations that I want to center my time on. |
_________________
http://uk.groups.yahoo.com/group/reloading16gauge/
Minnesota Gun Owners http://gocra.org/ |
|
|
|
|
|
|
| Posted:
Mon Aug 15, 2016 3:46 am
|
|
|
|
|
| Jakesmydog2, can you give us a progress report on the new spreadsheet? |
|
|
|
|
|
|
|
| Posted:
Mon Aug 15, 2016 4:24 am
|
|
|
Joined: 25 Aug 2014
Posts: 286
Location: Finger Lakes
|
|
| Jakeismydog2 wrote: |
Well I guess I did not realize the ramifications of my idea. So far I have been called a Plagiarizer, a guy who would date his friends Ex Wife, and worst of all a DEMOCRAT. I certainly do not intend to be a plagiarizer. I have definitely never dated anyone's ex wife. I sure as Hell have never been a Democrat. Just needed to get that off my back.
I am not a reloader. I have reloaded 2 boxes of shells in my life at my Co-workers house. My Co-worker, who created what I think is a very usable and unique database for 12 and 28 gauge loads, is a reloader. I simply saw the opportunity for me to use My knowledge base (Google Sheets), with data available (on this forum) to do something nice for others on this forum and create an improved database.
It seems no good deed goes unpunished. I have no interest in being in charge of any reloading group. I have no interest in "stealing" reloading data from guys on this forum who paid good money to have it tested and give it away for free.
The Database is 95% complete. Anybody on here that thinks I am doing them wrong by making this database can ask me and I will share the database with them. They can look over it and let me know what they think. If anyone says don't share it. I will delete the database.
As I said before, I was not trying to ruffle any feathers here. One of the reasons I am on this forum daily is the lack of BS, and general pleasantness of everyone on here.
|
I look forward to your data base. As I really like all the info in George's spreadsheet I think it could easier to navigate and ge to. |
|
|
|
|
|
|
|
