16ga.com Forum Index
Author Message
<  16ga. General Discussion  ~  Single shot 16ga
joe_dumy
PostPosted: Thu Mar 23, 2017 4:29 pm  Reply with quote



Joined: 11 Feb 2012
Posts: 57
Location: Olympia WA

Well finally found the one I wanted a Lefever 16a Trap gun. Can wait to get it and see what mods I need to do to get it to work for them. I want to keep the barrel 28" for muzzle control but it may get pretty out of balance if I have to shorten the stock too much. Should be a little on the heavy side since it is a trap gun which I didnt know they made in a 16ga. I really like the fit and finish on this gun. Doesnt seem like they tried to do short cuts to make it for less or put it on a 12 ga frame. Should be a fun 16ga to add to the family and with 3/4oz loads in the 1100 fps range should be ok on the recoil. Made in 1927. Cant wait to get it and take the kids shooting. This gun will get them some attention as well at the sporting clay events as it has a unique look and is a cool Brand.

http://www.gunbroker.com/item/632120892

Back to top
View user's profile Send private message
skeettx
PostPosted: Thu Mar 23, 2017 5:05 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 6948
Location: Amarillo, Texas

Suggestion

Leave the original stock alone and make/buy one to modify and when the kids get taller you will have the original and will have not devalued the gun.

Mike


Last edited by skeettx on Fri Mar 24, 2017 2:03 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
joe_dumy
PostPosted: Thu Mar 23, 2017 5:13 pm  Reply with quote



Joined: 11 Feb 2012
Posts: 57
Location: Olympia WA

Sheettx

Can you point me to were I could buy one, I can do some fitting if needed but from scratch not so sure. I would love to do that rather then ruin this one.

But It will always be a kids gun and dont plan on selling it so modifying is not the end of the world for me. But I am sure it breaks some hearts. I will preserve its legacy by using the heck out of it. All my shotguns are modified in some way to fit me and my needs.
Back to top
View user's profile Send private message
byrdog
PostPosted: Thu Mar 23, 2017 6:23 pm  Reply with quote
Member
Member


Joined: 22 Aug 2011
Posts: 1263
Location: the Moosehorn

this is just a guess but an Ithaca nitro special stock might be made to fit. some times Gun Stocks Inc. has them just raw walnut.

_________________
ALWAYS wear the safety glasses

If you take Cranberries and stew them like applesauce they taste much more like Prunes than Rhubarb does ----G.M/
Back to top
View user's profile Send private message Send e-mail
putz463
PostPosted: Fri Mar 24, 2017 1:22 am  Reply with quote
Member
Member


Joined: 06 Oct 2007
Posts: 1494
Location: west MI

Glad you found one.

For what it's worth, an FYI; my bud has one of these and I borrowed it when searching for a platform to make a dedicated trap gun project. My suggestion is for you to shoot it a bunch before the kids do and certainly before modifying it. IMO they are much too light to consider making a trap/target gun out of. Maybe as a carry all day and shoot it 6 times at Bunny's maybe. Mid-range 1oz loads beat the tar out of me (6' 190#) + the gun had a tendency to jump and slap my cheek, in short; punishing, so I passed before even putting any 3/4 or 7/8oz'ers through it. I fear shortening it would make it even more jumpy.

Please don't take my input as brow beating, I applaud you for passing the shooting sports on to the next gen, but, it'd be shame to see the effort "backfire" and have the kids get recoil shy off the bat via too light a gun.

Hope this info helps,

_________________
year round' bird hunter....uplands, waterways and golf courses...quack, boom, splash
Back to top
View user's profile Send private message Send e-mail
skeettx
PostPosted: Fri Mar 24, 2017 2:03 am  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 6948
Location: Amarillo, Texas

AND get the 410 inserts

http://www.littleskeeters.com/products.htm

_________________
,
Back to top
View user's profile Send private message Send e-mail
Griffon
PostPosted: Fri Mar 24, 2017 3:37 am  Reply with quote



Joined: 19 Apr 2014
Posts: 233
Location: maine

Ditto on what SamW said. Can't imagine that 16 isn't going to have some bite to it especially to a 10 years old frame. Get him recoil shy right off the bat and you might spoil his shooting experience. I bought my daughter years back a 1100 in a 28ga no recoil, she still enjoys shooting that gun today. Good safety training will eliminate the mutiiple shot worries. To me the antics of holding the gun still and getting the hammer cocked would be more of a safety worry than snapping off the safety. Leave your gun home the first few trips and concentrate on him.

_________________
If it weren't for women cats would be extinct.
Back to top
View user's profile Send private message
Gil S
PostPosted: Fri Mar 24, 2017 3:40 am  Reply with quote
Member
Member


Joined: 04 Mar 2008
Posts: 1500
Location: Lowcountry Ga.

You made a great choice and are taking the right course in using light loads. The Ballistic Products Advantages Manual has numerous light loads starting at 5/8 oz. and upwards. When you get it in your hands, let us know its weight, LOP, etc. Have fun! Gil
Back to top
View user's profile Send private message
joe_dumy
PostPosted: Sun Mar 26, 2017 4:42 pm  Reply with quote



Joined: 11 Feb 2012
Posts: 57
Location: Olympia WA

I cant wait to get it and try it out. For sure I will shoot it a bunch and find the best load for it. I will post the gun specifics and results when I get it. Recoil is a big concern of mine and heavy on my mind. Shot some 3/4 oz loads today and the patterns were good and the recoil not too bad but think there is room for improvement here. Thanks for all the feedback. And I certainly dont take it as browbeating or negative. I know everyone has the same concern that I make my kids recoil sensitive or worse yet turn them away from shooting all together. This will be a fun project.
Back to top
View user's profile Send private message
16gaDavis
PostPosted: Mon Mar 27, 2017 5:22 am  Reply with quote



Joined: 24 Jun 2013
Posts: 1127
Location: canandaigua - western n.y. (formerly deerhunter)

they are a nice / simple gun . It is a thru bolt stock , and not too complicated , so any of the stock mfgs should be able to help out . Mine is a 12 ga and has the Ithaca tapered rib . Old and beat as it is , it's kept on ticking - has only needed a new FP . A machinist can make easy enough . I would keep attn. toward recoil , as they are susceptible to cracking . The little 5/8 , 3/4 loads should be the BOMB !!

_________________
Molly sez AArrrooooooah !
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 2 of 2
Goto page Previous  1, 2
16ga.com Forum Index  ~  16ga. General Discussion

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09