I own a Husqvarna Mod 48 Engraved 16ga Hammer Gun SxS and I'm looking to replace the left size firing pin and spring. I took photos of the measures of the original one on the right size, it's weak and want to replace both, also the left size one is not the original screw "nipple", firing pin and spring and I want to see if I can find one that can work better. Can you guys guide me where to locate them?
Joined: 06 Apr 2007
Location: The Great Northwet
My advice is to buy a cheap parts gun. They can be had for around $100-200. I just bought a mod. 103A parts gun for my 103C so I could swap stocks, and I ended up with a much nicer stock, an extra barrel set with different chokes after I did some fitting, and extra hammers, firing pins, springs, etc. There are two different kind of firing pins and collars that most husky's have too. The kind you have are fairly shallow, while others are pretty deep. I have a bunch of Husky hammer guns and work on them constantly. Great guns.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum