16ga.com Forum Index
Author Message
<  16ga. General Discussion  ~  2 1/2 inch shotshell for vintage Greener
firemanfred22
PostPosted: Wed Nov 29, 2017 11:29 am  Reply with quote
Member
Member


Joined: 14 Sep 2011
Posts: 15
Location: Visalia CA.

Hello 16ga. I just picked up a little 16ga. Greener with Damascus barrels it has 2 1/2 inch chambers and was CIP nitro proofed in 2014 my question is what shotshells can I use in it I know the shells need to be low pressure but that's about as far as I got.
Any info. would be appreciated.

_________________
The worst day of shooting still beats the best day at work!
Back to top
View user's profile Send private message
Gil S
PostPosted: Wed Nov 29, 2017 12:26 pm  Reply with quote
Member
Member


Joined: 04 Mar 2008
Posts: 1943
Location: Lowcountry Ga.

There are two highly regarded commercial factories for low pressure loads. Polywad and RST. Both companies manufacture 2.5" shells. RST has a larger assortment per gauge. I have bought both. For this year, I bought two flats of Polywads in 2.5", #7.5 shot.
Back to top
View user's profile Send private message
skeettx
PostPosted: Wed Nov 29, 2017 12:38 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

Basic info
You need to have the barrel evaluated
You need to have the barrel measured
Then use the RST loads
Mike


Last edited by skeettx on Sat Jan 06, 2018 1:40 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
Gil S
PostPosted: Wed Nov 29, 2017 3:02 pm  Reply with quote
Member
Member


Joined: 04 Mar 2008
Posts: 1943
Location: Lowcountry Ga.

If your gun was "proofed" in 2014, especially in the UK, I would feel confident shooting low pressure loads. If the gun has been altered through wear or work done, under UK law, it must be reproofed before sale. The barrels are evaluated by the proof house and must be pit free, gun on face, etc. Chances are, the gun was "cleaned up" to remove pits before sale after restoration. As Mike pointed out, "measure" the barrels means to determine the minimum wall thickness, especially from the chamber forward to the muzzle. The critical area is from chamber forward for the first 9" and especially where the chamber meets the forcing cone. I don't believe the inspection by the proof house measures minimum wall thickness. Some British guns are incredibly light due to thinner barrel construction. Gil
Back to top
View user's profile Send private message
fn16ga
PostPosted: Wed Nov 29, 2017 5:56 pm  Reply with quote
Member
Member


Joined: 09 Jan 2013
Posts: 2165
Location: Florida

What load was it proof for , more than likely if it was nitro proofed in 2014 it is still in proof .
Back to top
View user's profile Send private message
67galaxie
PostPosted: Wed Nov 29, 2017 11:00 pm  Reply with quote



Joined: 16 Mar 2017
Posts: 226
Location: Valdosta GA

1) I would love to see some pictures of this gem and 2) I love the low pressure shells from polywad and rst! Turkey, quail, dove, ducks and clays do not know the difference. After all an ounce of 6's is an ounce of 6's right?
Back to top
View user's profile Send private message
Pine Creek/Dave
PostPosted: Sat Dec 02, 2017 9:33 am  Reply with quote



Joined: 17 Mar 2017
Posts: 2787
Location: Endless Mountains of Pa

FiremanFred22,
The men are giving you good advise, unless the gun was proof tested in the USA, Germany or GB consider having here done here in the USA.

I use both the Poly 2 1/2 SpredR loads or the RST's in my good German and American Classic 2 1/2" double guns, however all these guns have Krupp Barrels on them and have been shot for many life times already.

My advise to you is to find out who proofed your double gun and where, more than likely the 2014 proof test will hold true, if it was done by a Brit, German or USA company.

Post some pictures of you gun will ya?

Pine Creek/Dave

_________________
"L.C. Smith America's Best" - John Houchins

Pine Creek Grouse Dog Trainers
Back to top
View user's profile Send private message
Cheyenne08
PostPosted: Sat Dec 02, 2017 2:06 pm  Reply with quote
Member
Member


Joined: 09 Dec 2009
Posts: 1370
Location: Cheyenne, Wy

Pine Creek/Dave wrote:
FiremanFred22,
The men are giving you good advise, unless the gun was proof tested in the USA, Germany or GB consider having here done here in the USA.

I use both the Poly 2 1/2 SpredR loads or the RST's in my good German and American Classic 2 1/2" double guns, however all these guns have Krupp Barrels on them and have been shot for many life times already.

My advise to you is to find out who proofed your double gun and where, more than likely the 2014 proof test will hold true, if it was done by a Brit, German or USA company.

Post some pictures of you gun will ya?

Pine Creek/Dave


I didn't think there WERE any proof houses in the USA. Enlighten me please to where to send a shotgun to be proofed here in the USA?

Dale

_________________
One man with courage makes a majority.

...Andrew Jackson...
Back to top
View user's profile Send private message Send e-mail
firemanfred22
PostPosted: Sun Dec 03, 2017 8:24 am  Reply with quote
Member
Member


Joined: 14 Sep 2011
Posts: 15
Location: Visalia CA.

[quote="firemanfred22"]Hello 16ga. I just picked up a little 16ga. Greener with Damascus barrels it has 2 1/2 inch chambers and was CIP nitro proofed in 2014 my question is what shotshells can I use in it I know the shells need to be low pressure but that's about as far as I got.
Any info. would be appreciated.[/quote]


Thanks for the input all.
To answer some questions, the barrels were CIP proofed CIP (N) in England in 2014
I believe the (N) letter designates 11850 PSI. the barrels are mirror perfect on the inside and on face. On the outside the left barrel has a long sandpaper scratch ? the last owner trying to remove rust spots I guess. receiver was polished by some one and the stocks are I perfect shape. I purchased a flat of Polywad 2.5" shells Cant wait until they get here so I can shoot it. I would like to post photos but I cant click and paste.

_________________
The worst day of shooting still beats the best day at work!
Back to top
View user's profile Send private message
Pine Creek/Dave
PostPosted: Wed Dec 06, 2017 8:42 am  Reply with quote



Joined: 17 Mar 2017
Posts: 2787
Location: Endless Mountains of Pa

Dale,
I believe Browning and Ruger both have their own proof testing facilities, I do believe they will retest, however I have no idea of the price they charge. Hunter Arms had their own test facility, however they are long gone now.

Pine Creek/Dave

_________________
"L.C. Smith America's Best" - John Houchins

Pine Creek Grouse Dog Trainers
Back to top
View user's profile Send private message
67galaxie
PostPosted: Wed Dec 06, 2017 10:48 pm  Reply with quote



Joined: 16 Mar 2017
Posts: 226
Location: Valdosta GA

Can't wait to see it
Back to top
View user's profile Send private message
Cheyenne08
PostPosted: Thu Dec 07, 2017 8:45 am  Reply with quote
Member
Member


Joined: 09 Dec 2009
Posts: 1370
Location: Cheyenne, Wy

Pine Creek/Dave wrote:
Dale,
I believe Browning and Ruger both have their own proof testing facilities, I do believe they will retest, however I have no idea of the price they charge. Hunter Arms had their own test facility, however they are long gone now.

Pine Creek/Dave


Thanks Dave, I know firearm manufactures test their own firearms, but have never heard of any of them that offer proof testing to individuals for their own personal firearms, especially if they are vintage and foreign.

They sure don't advertise it. Wink

Dale

_________________
One man with courage makes a majority.

...Andrew Jackson...
Back to top
View user's profile Send private message Send e-mail
Beagle
PostPosted: Sat Jan 06, 2018 1:31 pm  Reply with quote



Joined: 11 Dec 2017
Posts: 6
Location: Vermont

Hi
Bashieri & Pellagri, Italian shotgun shells are very nice for older or European CIP-proofed guns. I now use them almost exclusively. Their 16ga shells pattern well and shoot clean.

Unfortunately they don’t make their “Dispersantes “ any longer. These were good spreaders.

Frank

_________________
Hung up on SxSs
Back to top
View user's profile Send private message
skeettx
PostPosted: Sat Jan 06, 2018 1:35 pm  Reply with quote
Member
Member


Joined: 15 Apr 2007
Posts: 9455
Location: Amarillo, Texas

Hello Beagle
and
Welcome on your first posting Smile

Where do you buy 16 gauge B&P ammo in the states?

Mike

p.s.

https://www.ableammo.com/catalog/product_filter.php

_________________
,
USAF RET 1971-95
Back to top
View user's profile Send private message Send e-mail
Beagle
PostPosted: Sat Jan 06, 2018 1:42 pm  Reply with quote



Joined: 11 Dec 2017
Posts: 6
Location: Vermont

Aerostar Outdoors

Aerostaroutdoors dott com

Every once in a while they have a sale and I’ll stock up. Even at egular prices they’re not too bad.

They used to list pressures on the website (maybe still do?) but they’re all CIP shells.

Also good source for 2 1/2 Inchers.

Frank

_________________
Hung up on SxSs
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 2
Goto page 1, 2  Next
16ga.com Forum Index  ~  16ga. General Discussion

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09