16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  3/4 or 7/8 oz load for new A5 Swt 16
Two Barrels
PostPosted: Sat Jan 27, 2018 8:37 am  Reply with quote



Joined: 11 Dec 2015
Posts: 83
Location: Upstate, SC

Does anyone have a 3/4 or 7/8 oz load using the DR wad and Cheddite hulls that will reliably cycle in one of the new A5 Sweet Sixteens?

Thanks,

TB
Back to top
View user's profile Send private message
oldhunter
PostPosted: Sat Jan 27, 2018 9:01 am  Reply with quote
Member
Member


Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota

Laughing Laughing

_________________
http://uk.groups.yahoo.com/group/reloading16gauge/
Minnesota Gun Owners http://gocra.org/
Back to top
View user's profile Send private message
double vision
PostPosted: Sat Jan 27, 2018 9:10 am  Reply with quote
Guest





The recoil is almost nonexistent with 1 oz. loads in the A5 SW16, so why bother with the weeny loads?
Back to top
goathoof
PostPosted: Sat Jan 27, 2018 9:54 am  Reply with quote
Member
Member


Joined: 15 Dec 2009
Posts: 226
Location: eastern oregon

In my circa early 1960's sweet 16, I use fiocchi hull and primer, dr16, 5/8 oz lead, and 22.5 grains green dot @ 1450fps. This is the lower end combo of mass and velocity to usually cycle the gun. I do not know if this will translate to your new gun or not; but it may give you some ideas to work with.
Back to top
View user's profile Send private message
Two Barrels
PostPosted: Sat Jan 27, 2018 10:51 am  Reply with quote



Joined: 11 Dec 2015
Posts: 83
Location: Upstate, SC

Dave Erickson wrote:
The recoil is almost nonexistent with 1 oz. loads in the A5 SW16, so why bother with the weeny loads?


I don’t need a full 1 oz to shoot skeet and five stand.

Thanks for the link Oldhunter.
Back to top
View user's profile Send private message
hoashooter
PostPosted: Sat Jan 27, 2018 10:10 pm  Reply with quote
Member
Member


Joined: 08 Nov 2005
Posts: 3436
Location: Illinois

Dave--I guess as a group-we/skeet shooters/don't like heavy loads--Why use more than you need???Even when shooting clays I use loads from 3/4--1 1/8 in the 16--I match the target to the clay---reducing recoil and the cost---
Back to top
View user's profile Send private message
AmericanMeet
PostPosted: Sat Jan 27, 2018 11:40 pm  Reply with quote



Joined: 26 Apr 2010
Posts: 3172
Location: NCWa

My favored load is 16.6 gr of Green Dot with either 3/4 or 7/8 oz in the cheddite w/DR16; but I shoot a Dbl Brl so don't know if it will cycle the action. I do know that I can shoot a full course against guys that are shooting 12 ga's and I'm still fine when they are complaining about sore shoulders.
Back to top
View user's profile Send private message
fn16ga
PostPosted: Sun Jan 28, 2018 4:05 am  Reply with quote
Member
Member


Joined: 09 Jan 2013
Posts: 2165
Location: Florida

This load will cycle mine

· 3/4 oz #7 ½ magnum lead shot (Lawrance)
· Cheddite Blue Hull (16 mm brass) 2 ¾” 16 ga
· Fed209A Primer
· 20 grains Greendot powder
· DR16 wad (Downrange)

FPS (1489, 1499, 1467, AVG 1485 ES 32)
PSI (10400, 9400, 10100, AVG 9966 ES 1000)
Back to top
View user's profile Send private message
double vision
PostPosted: Sun Jan 28, 2018 6:09 am  Reply with quote
Guest





hoashooter wrote:
Dave--I guess as a group-we/skeet shooters/don't like heavy loads--Why use more than you need???Even when shooting clays I use loads from 3/4--1 1/8 in the 16--I match the target to the clay---reducing recoil and the cost---


I totally get that and I reload light 7/8 oz loads by the thousands for my lighter doubles. However my autos including my SW16 soak up the recoil, so I can shoot inexpensive factory ammo. I buy the 1 oz factory Herter's when on sale with free shipping and reserve them for my SW16, and I have inexpensive 12 ga target ammo on reserve for my 12 gauge auto. Factory ammo also tends to function better in autos and the extra oomph never leaves you wondering if the next batch will cycle your action. The empties are saved for light reloads in my doubles. I shoot my doubles at targets a lot more than my autos, so the hull producing ratio works and doesn't break the bank. Different thoughts I guess. I didn't mean to stir up trouble! Smile
Back to top
oldhunter
PostPosted: Sun Jan 28, 2018 9:57 pm  Reply with quote
Member
Member


Joined: 03 Dec 2006
Posts: 759
Location: Somewhere in the Socialist State of Minnesota

Laughing Cool Shocked Sad

_________________
http://uk.groups.yahoo.com/group/reloading16gauge/
Minnesota Gun Owners http://gocra.org/
Back to top
View user's profile Send private message
double vision
PostPosted: Mon Jan 29, 2018 5:14 am  Reply with quote
Guest





oldhunter wrote:
Laughing Cool Shocked Sad


Either he's hungry, needs a nap, or a diaper change. Laughing
Back to top
fn16ga
PostPosted: Tue Jan 30, 2018 3:48 am  Reply with quote
Member
Member


Joined: 09 Jan 2013
Posts: 2165
Location: Florida

And speechless .
Back to top
View user's profile Send private message
readgriff
PostPosted: Tue Jan 30, 2018 4:59 am  Reply with quote



Joined: 06 Jun 2008
Posts: 117

AmericanMeet wrote:
My favored load is 16.6 gr of Green Dot with either 3/4 or 7/8 oz in the cheddite w/DR16; but I shoot a Dbl Brl so don't know if it will cycle the action. I do know that I can shoot a full course against guys that are shooting 12 ga's and I'm still fine when they are complaining about sore shoulders.


What primer do you use with that load?
Thanks
Back to top
View user's profile Send private message
Dogchaser37
PostPosted: Tue Jan 30, 2018 7:19 am  Reply with quote
Member
Member


Joined: 08 Aug 2011
Posts: 1946
Location: Central CT

I have a 3/4 & a 7/8 oz. load

3/4oz.

Cheddite 2 3/4" green hull
Winchester 209 primer
18.0 Grains American Select
DR-16 wad
3/4 oz. lead shot
1,339 FPS 9,480 PSI

7/8 oz.

Cheddite 2 3/4" green hull
Winchester 209 primer
23.0 Grains Universal
DR-16 wad
7/8 oz. lead shot
1,424 FPS 11,180 PSI

You can reduce both loads by 2.0 grains of powder and still have a reliable load.

The 7/8 oz. load will definitely cycle the new Browning A5. It cycles the original A5 Sweet with no issues.

Tom Armbrust did the testing on both loads.

_________________
Mark
Back to top
View user's profile Send private message
Two Barrels
PostPosted: Tue Jan 30, 2018 8:50 am  Reply with quote



Joined: 11 Dec 2015
Posts: 83
Location: Upstate, SC

Thanks to all of you for the information. I have some loading/testing to do now.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 2
Goto page 1, 2  Next
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09