Author |
Message |
< 16ga. Ammunition & Reloading ~ How about this recipe? |
|
Posted:
Thu Dec 07, 2006 6:15 pm
|
|
|
Member
Joined: 01 Dec 2006
Posts: 524
|
|
1oz or 7/8 load:
Federal Hull
Federal 209 Primer
Universal Clays powder-7/8=16.5 gr 1oz=16.5-17.0
Remington Wads SP-16 1 1/8 oz capacity |
|
|
|
|
|
|
|
Posted:
Thu Dec 07, 2006 6:26 pm
|
|
|
Member
Joined: 08 Nov 2005
Posts: 3438
Location: Illinois
|
|
The Federal hull is better suited for decent payloads of shot--switch to the Remmy black for those light loads and I would also go with Unique |
|
|
|
|
|
|
|
Posted:
Thu Dec 07, 2006 9:41 pm
|
|
|
Member
Joined: 02 Dec 2005
Posts: 591
Location: Plains, MT.
|
|
The low pressure group has done many tests on the Federal hull but not with the SP16 wad. Federal hull, 1 oz., Univ Clays 22 gr, Fed 209A, SG16 Wad, 8,200 psi, 1220 fps. This from 96 Hodgdon.
Best,
Ron |
|
|
|
|
|
|
|
Posted:
Thu Dec 07, 2006 10:41 pm
|
|
|
Member
Joined: 01 Dec 2006
Posts: 524
|
|
|
|
|
|
|
Posted:
Fri Dec 08, 2006 10:08 am
|
|
|
Member
Joined: 12 Mar 2005
Posts: 6535
Location: massachusetts
|
|
Actually, Unique and Universal clays are so close in burn rate as to ignore the difference. However, the two throw a bit differently and require different powder bushings.
As for the 7/8 ounce load, I'd switch to Green dot or International clays. They are both a bit faster, cleaner, and will give more uniform ballistics in this lighter load. |
|
|
|
|
|
|
|
Posted:
Fri Dec 08, 2006 2:24 pm
|
|
|
Member
Joined: 01 Dec 2006
Posts: 524
|
|
if I use that recipe that Ron lists above but substitute the sg16 with sp16's will there be a problem? Arent the wads very similar if not identical? |
|
|
|
|
|
|
|
Posted:
Fri Dec 08, 2006 4:14 pm
|
|
|
|
Quote: |
if I use that recipe that Ron lists above but substitute the sg16 with sp16's will there be a problem? Arent the wads very similar if not identical?
|
NO NO NO
You need to contact RWG and join the low pressure group or at least get a copy of Chuckerman's loading data before you blow your sweet old Sterlingworth all to hell. |
Last edited by Twice Barrel on Fri Dec 08, 2006 4:30 pm; edited 1 time in total |
|
|
|
|
|
|
Posted:
Fri Dec 08, 2006 4:18 pm
|
|
|
Member
Joined: 01 Dec 2006
Posts: 524
|
|
All go ahead and get some SG16's then. |
|
|
|
|
|
|
|