| Author |
Message |
| < 16ga. General Discussion ~ Stock touch up |
|
 Posted:
Wed Feb 03, 2021 7:20 am
|
|
|
Joined: 21 Dec 2020
Posts: 29
|
|
Finish is worn off from carrying it on the neck. Don't want to strip and redo entire thing. Was thinking a few coats of urethane with steel wool between each should be good.
Better ideas appreciated.
Thanks |
|
|
|
|
|
 |
|
| Posted:
Wed Feb 03, 2021 7:50 am
|
|
|
Member
Joined: 27 Jun 2012
Posts: 1113
|
|
| When I get a stock finish wearing thin from handling the gun, I use Truoil thinned 5 parts mineral spirits to 1 part oil on a folded paper towel pad. Just wet the pad with a few drops of the finish and rub the thinned area like you were spit shining a shoe. Repeat a few times until you are happy with the buildup and the repaired thin area just disappears. |
_________________
An elderly gentleman, his faithful dogs, and a 16 ga SXS. All is right with the world. |
|
|
|
|
|
|
| Posted:
Wed Feb 03, 2021 8:49 am
|
|
|
Joined: 07 Sep 2011
Posts: 567
Location: wheeling, wv
|
|
| Timberluxe! |
_________________
we salute you bird of thunder |
|
|
|
|
|
|
