Author |
Message |
< 16ga. Ammunition & Reloading ~ DR-16 load data |
|
Posted:
Mon Feb 20, 2023 2:54 pm
|
|
|
Joined: 11 Feb 2012
Posts: 70
Location: Olympia WA
|
|
Some how I lost all my load data that i have been building for a long time and now I have to start the search over and hit the patterning board again to find good patterning loads. I really enjoyed shooting some of the DR-16 loads so much so I bought 3000 of them. But some how I got derailed into making the perfect 1oz load and lost track of the DR-16 loads. I also lost access to the low pressure yahoo doc that so many of these loads were on.
If some buddy could share some DR-16 loads with Chedite hulls and primers I would appreciate it. Or help me access the low pressure yahoo doc that would be great. I am ready to explore this great wad once again. |
|
|
|
|
|
|
|
Posted:
Mon Feb 20, 2023 3:15 pm
|
|
|
Joined: 16 Jul 2015
Posts: 2127
Location: Hudson,Wy
|
|
yahoo doc went over to 24hr campfire site. Someone here might have a a link. |
_________________ Only catch snowflakes on your tongue AFTER the birds fly south for the winter... |
|
|
|
|
|
|
Posted:
Mon Feb 20, 2023 7:58 pm
|
|
|
Joined: 07 Jun 2020
Posts: 233
|
|
|
|
|
|
|
Posted:
Thu Mar 30, 2023 1:53 pm
|
|
|
Joined: 06 Jan 2017
Posts: 93
|
|
Here's one for you: I had Tom Armbrust test it for me when I first started reloading the previous (purple) Herters:
Herters hull
Cheddite primer
17.3 grains Alliant 20/28
DR-16 wad
7/8 oz shot
Avg velocity 1182 fps
Avg pressure 7420 psi
You might have an issue if you don't have 20/28 powder. Hard to find right now.
I'm using a very slightly modified version of that same recipe in the new Herters (or new Winchesters--same hull). All I did to compensate for the shorter hulls was to drop down one powder bushing. About 0.7 grains less. Plus tinkered a bit with crimp depth. Have shot a few boxes of those at skeet. About 25 degrees last time I did that, and judging by sound, the temperature didn't seem to make a difference. The new hulls reload well with that change to the recipe.
I have enough 20/28 to keep going for awhile, but I'm about to run out of DR-16's. Anyone else reloading 7/8 in the Herters hulls with 20/28 powder but a different wad? Thanks. |
|
|
|
|
|
|
|
Posted:
Tue May 02, 2023 2:18 pm
|
|
|
Joined: 19 Jan 2019
Posts: 289
Location: Idaho & South Dakota
|
|
Scuttlebutt is that DR16 wads may be available again this summer. |
_________________ "A gun should be a thing of beauty, something which gives its owner pride and pleasure. For that reason, most men will buy the best gun they can afford. With a good gun on his arm, a man becomes a sporting gentleman, both on the field and off." |
|
|
|
|
|
|