16ga.com ~ View topic

Joined: 09 Feb 2015 Posts: 941

I have a broken extractor on my browning 42. Where or who can I contact. Ph# please. Any web sights gets things and me all mixed up. Thanks Hammer Bill

Member Joined: 06 Oct 2007 Posts: 2545 Location: West MI

Since internet searches confuse you, try calling any of these guys, from the Browning site....

https://www.browning.com/support/parts-service/obsolete-firearm-parts-service.html?srsltid=AfmBOopkTkaLWz5qoeMBi96zedNjKXvy_xWEriKoKWfwWFJl7V1S8oWS

Obsolete Browning Firearms Parts and Service
This page first displays a list of dealers that support obsolete Browning firearms. As you scroll down the page you will then see a list of the obsolete firearms with a letter associated with the dealers listed above.

As you may know, the guns on this page have been considered obsolete for a number of years, and there has been no production of spare parts at the factory. Our parts inventory was becoming depleted and we could no longer adequately provide customer sales and service. This has made it necessary for us to discontinue the sale of original parts for these firearms.

Please note: The parts and repair sources listed below are our best suggestions at this time. These shops are independent dealers and are in no way under Browning jurisdiction.

Obsolete Firearm Support Dealers
A
Ahlman's Custom Gun Shop
9525 West 230th Street
Morristown MN, 55052
Phone: 507-685-4244
Fax: 507-685-4280

B
Midwest Gunworks
1101 Mason Circle Drive South
Pevely MO, 63070
Phone: 636-475-7300
Fax: 636-475-7303
Website
Email

C
Western Gun Part Limited
18124 107 Avenue NW
Edmonton, AB T5S 1K5
Phone: 780-489-5711
Fax: 780-489-5717
Website
Email

D
Lee Gun Parts
M, T, Th 9-5
3401 w Pioneer Dr Suite #2
Irving, TX 75061
Phone: 972-790-0773

F
Bob's Custom Gun Shop
1133 South Shore (Highway 35)
Polson MT, 59860
Phone: 406-883-2432
Fax: 406-883-2476

G
Numrich Gun Parts
226 Williams Ln.
Kingston, NY 12401
Phone: 866.686.7424
Fax: 877.486.7278
Website

Good luck, if it's what looks to be a sintered metal hens tooth might have to talk to a talented machinist to cut one from a hunk of carbon steel. Do you have the broken parts to use as a template? If I was your talented go to I'd need the pieces/parts to fab/work from. Wondering how different it actually is from a BPS extractor.

If you want to order the parts and fix it yourself Jack First Gun Parts has them. Side note, it looks like there are both left and right side extractors. 605-343-8481.

If your plan is to send it to someone to have it repaired I will second Midwest Gun Works from the above response, they are a factory authorized dealer for Winchester and Browning and have done some work for me. They are good, but not fast. Hard to get both at the same time.