| Author |
Message |
| < 16ga. Ammunition & Reloading ~ 16ga drilling loads |
|
 Posted:
Tue Feb 13, 2007 7:41 pm
|
|
|
Joined: 28 Oct 2005
Posts: 126
Location: penna
|
|
| I know this topic section is for 16ga. But if anyone out there with 16ga drilling with 5.6x52r (22 high power), or 16ga drilling with .300 sherwood. Contact me , I have developed some new loadings for these rifle calibers utilizing existing american bullets. |
|
|
|
|
|
 |
|
| Posted:
Tue Feb 13, 2007 11:21 pm
|
|
|
Member
Joined: 08 Nov 2005
Posts: 3438
Location: Illinois
|
|
| greg--I don't have one --yet---and would appreciate the info--please pm me,thanks |
|
|
|
|
|
|
|
| Posted:
Wed Feb 14, 2007 3:23 am
|
|
|
Joined: 28 Oct 2005
Posts: 126
Location: penna
|
|
| I will wait and see if any members have these calibers and will put the info up here, if requested. I do not want to dilute this ammo section topic because these are rifle loads not 16ga info, but this site would most likely contain a member with such needs since most nearly all drillings are 16ga. 2 1/2 low pressure. These two calibers (22 high power dia .227, and .300 sherwood dia. .300) are" difficult" to obtain bullets&loads. A member here may be contemplating a 16ga drilling/combo o/u purchase and unsure of these two rifle calibers. |
|
|
|
|
|
|
|
