| Author |
Message |
| < 16ga. General Discussion ~ Barrel Dent Removal? |
|
 Posted:
Sat Feb 02, 2008 8:13 pm
|
|
|
Joined: 02 Feb 2008
Posts: 2
|
|
I have a Ranger 103 16ga that I picked up at an auction. It is in very good condition other than a dent in the top barrel. I have checked all of the local gunsmiths but they only have tools for 12 gauge barrels. Can anyone recommend a shop?
Thanks,
Ken |
|
|
|
|
|
 |
|
| Posted:
Mon Feb 04, 2008 10:18 am
|
|
|
Member
Joined: 07 Jul 2004
Posts: 609
Location: Sothern Illinois
|
|
| Would it be worth sending to Briley. A friend of mine had some work done by them and I was impressed. |
|
|
|
|
|
|
|
| Posted:
Mon Feb 04, 2008 1:41 pm
|
|
|
Member
Joined: 28 Dec 2005
Posts: 2016
Location: Glendale, AZ
|
|
|
|
|
|
|
| Posted:
Tue Feb 05, 2008 7:00 am
|
|
|
Joined: 02 Feb 2008
Posts: 2
|
|
I live in North Central Ohio.
I was hoping to have this done on the cheap. The local shops quoted $20-$25 if it were a 12ga. I know that shipping alone will now cost that much but still would like to keep the total under $100.
Thanks,
Ken |
|
|
|
|
|
|
|
| Posted:
Tue Feb 05, 2008 12:38 pm
|
|
|
Member
Joined: 08 Oct 2006
Posts: 1395
Location: Tappahannock, Virginia
|
|
| kenoh2 wrote: |
I live in North Central Ohio.
I was hoping to have this done on the cheap. The local shops quoted $20-$25 if it were a 12ga. I know that shipping alone will now cost that much but still would like to keep the total under $100.
Thanks,
Ken
|
Then Mike Orlen is your best bet. I know he does 16ga, as he did a sxs for me. he also polished the forcing cones while it was there. Fast turn around, very fair prices. |
|
|
|
|
|
|
|
