| Author |
Message |
| < 16ga. Ammunition & Reloading ~ Cheddite Hulls |
|
 Posted:
Fri Oct 31, 2008 7:30 pm
|
|
|
Joined: 19 Apr 2008
Posts: 477
|
|
I was looking at some 16 ga Cheddite hulls at Graf and son. They had two types. 8mm and 16mm. This is new to me. What does this mean? Which do I want to make standard 2 3/4 inch reloads?
Thanks, Sneem |
_________________
Many places remain undiscovered. Some because no one has ever been there. Others because no one has ever come back. |
|
|
|
|
 |
|
| Posted:
Fri Oct 31, 2008 7:34 pm
|
|
|
Member
Joined: 09 Dec 2005
Posts: 989
Location: Las Vegas
|
|
I believe those measurements refer to the height of the brass. (low brass vs high brass). Other than that they are identical and either one should reload the same.
Matt |
|
|
|
|
|
|
|
| Posted:
Fri Oct 31, 2008 7:53 pm
|
|
|
|
|
| The only reason I can think of is that you may want to distinguish target loads from field loads by the different brass height but internally they are identical and loading data is interchangeable. |
|
|
|
|
|
|
|
| Posted:
Fri Oct 31, 2008 8:01 pm
|
|
|
Joined: 19 Apr 2008
Posts: 477
|
|
Thanks guys.
Makes sense to me. |
_________________
Many places remain undiscovered. Some because no one has ever been there. Others because no one has ever come back. |
|
|
|
|
|
|
