| Author |
Message |
| < 16ga. Ammunition & Reloading ~ WAD DIM. |
|
 Posted:
Wed Jun 10, 2009 8:42 pm
|
|
|
Joined: 28 Jan 2009
Posts: 107
|
|
While looking at the spread sheet,@ the SG-16 V.S. G-28 I can't see any differance in the specs.
Looking for the best choice for 7/8 oz in ched. hull @ 2 1/2"........I have been using the SG-16 , but I see a similar load with the G-28 with the remarks that it is a good load.
I did read that the G-28 is for the bigger pay-load, but I can't see the differance.
thanks in advanve BRUCE |
|
|
|
|
|
 |
|
| Posted:
Wed Jun 10, 2009 9:28 pm
|
|
|
|
|
| Bruce the SG 16 is the Gualandi 1621. The G28 is the Gualandi 1618. They are essentially the same wad with the exception of the little nubs inside the powder cup which regulates how far down on the powder charge the wad will sit. Load data is interchangeable between the two. |
|
|
|
|
|
|
|
| Posted:
Thu Jun 11, 2009 3:18 am
|
|
|
Member
Joined: 27 Jun 2005
Posts: 1545
Location: Michigan
|
|
I personally like the Gualandi 1621, for 7/8 oz. load in the 2-1/2" hull.
It sits a little higher on the powder and I get great crimps.
Try the Gualandi 1618, when your trying to get 1 oz. in a 2-1/2" Cheddite hull. |
|
|
|
|
|
|
|
