16ga.com Forum Index
Author Message
<  16ga. General Discussion  ~  PolyChoke gunsmithing
mcs
PostPosted: Mon Mar 01, 2010 6:02 pm  Reply with quote



Joined: 30 Nov 2009
Posts: 112
Location: SWFlorida

I want to install a PolyChoke on a Remington Sportsman 48 barrel that will be cut to 24" overall. I have the barrel now, and part of the circumstance involves a dirty bore that was left to rust 3-4" behind the muzzle. Looks great outside but was a mess inside. I cleaned it up but the bore is obviously pitted at that end. So we'll chop off a few inches, no problem, and that will get most of it but there'll still be some pitting to clean up.

I contacted PolyChoke and they offered to hone and clean up the bore along with cutting the barrel and installing their choke.

So the question is: should I let them have at it? I've read some guys here talking about the real challenge of working on shotgun bores. I'll be ending up with a back-bored barrel... I'm thinking PolyChoke knows what they're doing, but maybe someone will tell me why I'd be better off having a different specialist deal with things.

Thanks.
Back to top
View user's profile Send private message Send e-mail
deer hunter
PostPosted: Mon Mar 01, 2010 6:10 pm  Reply with quote
Member
Member


Joined: 21 Jun 2009
Posts: 1285
Location: western n.y.

polished is polished - i wouldn't let that stop me and you could decide to leave more of the barrel if you wanted . a solid piece is attached to the barrel with the fingers and the adjusting sleeve is screwed on to that . they've done a few million of them in all gauges , so i would think they know what to do .

_________________
fins , feathers , furs and a loud Beagle howl - life's little treasures . bill & molly the beagle
Back to top
View user's profile Send private message
Brewster11
PostPosted: Mon Mar 01, 2010 9:49 pm  Reply with quote



Joined: 08 Feb 2009
Posts: 1301
Location: Western WA

Just have to add comment here...

My first shotgun was a M12 12 ga with a Polychoke with vented extension at the end of it. Even back then a lot of folks, including my buddies, didn't think much of it.

I wondered then at what point the the whole thing would come flying off the barrel with the shot.

I shot the dickens out of it with every load under the sun. Lead, steel, buckshot, steel Ts and Fs, you name it. Used it with slugs, sometimes on the wrong setting. The F and XF never did much for me, and the patterns didn't look any different than IM. But it belched a solid wall of lead on IC and M and bagged a ton of birds. And even more rabbits until Pop hinted that Mom was a little tired of cleaning them up after I "field dressed" them and dumped them in the sink. Varmints. Racoon. Fox. Deer. Basically anything that was in season. And maybe some things that weren't. Rolling Eyes

That Polychoke is still on the gun, although it hasn't been in the field for over 20 years.

I won't ever belittle a Polychoke.
Back to top
View user's profile Send private message
patriot usa
PostPosted: Tue Mar 02, 2010 7:10 pm  Reply with quote
Member
Member


Joined: 18 Aug 2008
Posts: 431
Location: peoples socialist republic

I have a Sweet Sixteen vent rib that Poly Choke in stalled their choke on. It shoots dead on with true size patterns. It was a full choke barrel before.
Yeah, they may take some sleekness looks away; but I'll take the convenience over that.

_________________
Don't sacrifice the future on the altar of today
Back to top
View user's profile Send private message
mcs
PostPosted: Tue Mar 02, 2010 8:11 pm  Reply with quote



Joined: 30 Nov 2009
Posts: 112
Location: SWFlorida

I'm already a PolyChoke fan -- 2-3 years ago picked up an old Franchi 48AL plain barrel 20 ga that has one.


Sounds like what I have in mind is a pretty simple deal -- go ahead and let PolyChoke do the job. I want to mention that the company owner gets on line and answers email when you ask a question. I appreciate that.

I posted here to make sure there aren't pitfalls I ought to know about, particularly with honing out the rusted bore. Seems like not.

Thanks all.
Back to top
View user's profile Send private message Send e-mail
patriot usa
PostPosted: Wed Mar 03, 2010 8:37 am  Reply with quote
Member
Member


Joined: 18 Aug 2008
Posts: 431
Location: peoples socialist republic

I'm sure if Poly Choke does the honing, they will not go beyond minimum wall thickness.

_________________
Don't sacrifice the future on the altar of today
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 1 of 1
16ga.com Forum Index  ~  16ga. General Discussion

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09