16ga.com Forum Index
Author Message
<  16ga. Ammunition & Reloading  ~  16 Gauge Low Pressure Reloading Group
jcs375
PostPosted: Mon May 10, 2010 4:05 pm  Reply with quote



Joined: 10 May 2010
Posts: 1
Location: Australia

I am in Australia and was told about the 16 Gauge Society which I immediately joined as I have been using the 16g for years. I am particularly interested in the Low Pressure Group as I am using an old German Drilling and don't wish to knock it around anymore than I need to. Unfortunately there is absolutely no reloading data in Australia for 2&1/2" inch hulls. I sent via Paypal $25US to join but am unsure if this is for joining just the 16 Gauge Society, the Low Pressure Group or both. Any information would be greatly appreciated.
Back to top
View user's profile Send private message Send e-mail
bluskies
PostPosted: Wed Sep 01, 2010 8:13 pm  Reply with quote
Member
Member


Joined: 11 Aug 2010
Posts: 10
Location: Florida

Please add me to the reloading list. I hunt a variety of birds, quail, pheasant, grouse, ducks and geese. I have a Fox Sterlingworth sxs, browning sweet 16 and remington 1100. I have a mec progressive loader and am interested in loading both lead and nontox, but no steel.

_________________
Doug
Back to top
View user's profile Send private message
yellowknifedave
PostPosted: Sun Jan 30, 2011 8:45 pm  Reply with quote



Joined: 30 Jan 2011
Posts: 1

Howdy. I am very glad I happened on to this site. I have been a combo shooter forever, and have recently got a drilling in 16gauge, that will probably only be taken out on Sundays in July..........

I have assembled all of the components, and would sure like to get access to safe data to start trying this out.
Thanks.
YKD
Back to top
View user's profile Send private message
Jnclem
PostPosted: Fri Feb 04, 2011 9:27 pm  Reply with quote



Joined: 22 Jan 2011
Posts: 4
Location: Gunnison, CO.

I would like to join this reloading group. I need information on LP loads for my Parker 16 ga. I would like to pay by PayPal and get the data asap.

Thank You

_________________
Parker 16
Back to top
View user's profile Send private message
Gil S
PostPosted: Mon Jun 06, 2011 8:49 am  Reply with quote
Member
Member


Joined: 04 Mar 2008
Posts: 1943
Location: Lowcountry Ga.

I'd like to sign up. Please send info. Gil
Back to top
View user's profile Send private message
old colonel
PostPosted: Wed Jul 27, 2011 9:04 pm  Reply with quote
Member
Member


Joined: 01 Dec 2008
Posts: 605
Location: Topeka, Kansas

I joined on May 26 2009, but have not logged on in so long I have lost my log in address and data, please send me the info I need or if I need to pay new dues let me know that

_________________
Michael
Topeka, KS
Back to top
View user's profile Send private message Send e-mail
Dave in Maine
PostPosted: Wed Sep 14, 2011 11:19 am  Reply with quote



Joined: 12 Sep 2010
Posts: 1972
Location: Maine

Need to join so I can get 2 1/2 in loads for my new-old French sxs. Already sent a PM.
Back to top
View user's profile Send private message
Moves
PostPosted: Wed Jan 18, 2012 11:09 am  Reply with quote
Member
Member


Joined: 26 Dec 2011
Posts: 62
Location: Brea, CA

Hi,

I have sent in the private message a couple days ago. Need to join the reloading group.

Joel
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Country Nate
PostPosted: Thu Mar 15, 2012 5:21 pm  Reply with quote



Joined: 13 Mar 2012
Posts: 1

Hi Russ,

I would like to get information on the low pressure loads.

I sent a PM a few days ago. If you did not get, please let me know.

Thanks, Nate
Back to top
View user's profile Send private message
Bland
PostPosted: Sun Apr 29, 2012 10:21 pm  Reply with quote



Joined: 27 Apr 2012
Posts: 4
Location: Smithers Landing, BC

Still learning how the site works. Would like to join the low pressure group. Just purchased a Tom Bland and Sons 16 gauge circa 1870. The lowest pressure shell available in Canada is the Kent Gamebore in 2 1/2 inch. This is a good quality brand but a little strong at approx. 8000 psi. The RST and Polywad unfortunately are not available up in the great white north. Looks like reloading is the way to go. I claim total rookie status. Grouse season opens September 10th. With a little help I could be ready.
Back to top
View user's profile Send private message
eng-pointer
PostPosted: Fri May 25, 2012 7:00 am  Reply with quote
Member
Member


Joined: 24 May 2012
Posts: 353
Location: United States

I would be very interested in joining the low pressure loading group. I have been loading 16 ga shells for 20 years and it has become harder and harder. I do still have a fair stock pile of winchester compression hulls and activ hulls but have recently purchased a few hundred primed cheddite hulls and need some low pressure loads for my Elsie. Thanks for your time.
Back to top
View user's profile Send private message
shouseal
PostPosted: Tue Aug 07, 2012 4:03 pm  Reply with quote



Joined: 07 Aug 2012
Posts: 52
Location: Michigan

How do I go about joining the Low Pressure Group and getting data? Is the group still active?

Steve

_________________
Steve
Back to top
View user's profile Send private message
onefunzr2
PostPosted: Fri Aug 10, 2012 7:01 am  Reply with quote
Member
Member


Joined: 16 Jan 2006
Posts: 1008
Location: Sandy Lake, PA

Go to the first page of this thread. Scroll down to the third post by member RWG. Russ runs the Low Pressure Group on Yahoo. Click on PM and send him a personal message asking how to join our group. Pretty simple. I believe the one time cost is still $20.

_________________
------------
Davy 03C&R FFL
Back to top
View user's profile Send private message
Montana16
PostPosted: Sat Aug 11, 2012 2:44 pm  Reply with quote



Joined: 14 Oct 2011
Posts: 110
Location: Eastern Washington

Have a 1925 simpson suhl that I enjoy using for bird hunting/shooting. A friend of mine provided some low pressure reloads to shoot and they were fantastic. Busted the clays (and the birds) with minimal recoil.

New to reloading and see the link to the google spreadsheets. The pressures on these recipes are anywhere from 8-11,000 psi. Is it fair to assume that low pressure (what old guns were designed to shoot) are anywhere below 9,500 psi? Might not be a definitive answer but I'd be curious to hear what people think constitutes low pressure.
Back to top
View user's profile Send private message
Hootch
PostPosted: Sat Aug 11, 2012 2:48 pm  Reply with quote



Joined: 28 Mar 2008
Posts: 1460
Location: Eagle, Nebraska

I have no idea why people worry about low pressure. If your gun is in such sorry state, that you are worried about shooting 9k psi in it, I wouldn't be shooting it. Secondly, the weight of shot you are using will be far harder on older guns (if you are worried about wood and old parts) than pressure.

stop worrying about pressures.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 7 Hours

View next topic
View previous topic
Page 6 of 14
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 12, 13, 14  Next
16ga.com Forum Index  ~  16ga. Ammunition & Reloading

Post new topic   Reply to topic


 
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and NoseBleed v1.09